The air conditioner can be installed by yourself, but you must master certain skills. First of all, we should carefully check whether the air conditioner is intact during installation, and then measure the height of the indoor unit and open through wall holes. When installing the outdoor unit, we should pay attention to the correct installation and complete supporting facilities. If we are not sure about the installation, we suggest to find a special installer.
With the development of modern life, air conditioning has become a necessity in our home. It can bring us cool in hot summer and warm in cold winter. It is very practical. Generally, the air conditioners we buy at home need to be installed. If we want to do it ourselves at this time, we must master certain skills.
First, we should open the package of the air conditioner, check whether the appearance of the unit is damaged, and then pay attention to the installation position to see whether it is appropriate. Then measure the height of the indoor unit, and then open the through wall hole according to the appropriate height to keep the inner high and the outer bottom. The indoor unit should be about 3 cm lower than the outdoor unit to facilitate drainage.
The outdoor unit is a little troublesome during installation. It is required to install it properly and use the supporting expansion bolt. If the drawing is convenient to omit, it will be a lot of trouble in future use. When the cooling copper pipe is in shape, it is best to use gas welding to weld it on the original copper pipe, and then wrap it tightly with an insulating sleeve.
Generally, the steps of air conditioning installation are very cumbersome. If you are not sure, it is recommended to find a special installer for installation, which can be faster and more convenient.