How to clean the thick oil dirt of range hood
1. Take a plastic bottle, poke more than ten small holes on the cover with a sharp tool, then fill it with an appropriate amount of detergent, fill it with warm water and shake it evenly. Start the range hood and spray the plastic bottle filled with cleaning fluid towards the part of the range hood to be washed. At this time, it can be seen that oil and dirty water flow into the oil tank. After the oil tank is full, remove it and pour out the sewage inside. After the cleaning solution in the bottle is used up, continue to prepare and repeat cleaning. Until the dirty water flows out, it can be washed clean after 4 times.
2. For the cleaning of the oil storage box, a layer of fresh-keeping film can be pasted in the oil storage box after each cleaning of the range hood. Part of the fresh-keeping film should exceed the oil storage box and completely cover the inner surface of the original box, so that the oil fume can be adsorbed on the fresh-keeping film, and it can be replaced at regular intervals, which saves trouble.
3. To clean thoroughly, disassembly is a good method. First remove the screen cover, unscrew the two screws on the oil filter screen cover, and place the screws properly without losing them. Then put a plate of hot water and soak it with some detergent for 30 minutes, and then brush the oil filter screen, cover and oil bowl with a soft brush to clean and drain. The inside of the host can only be sprayed with special detergent, then wiped clean with plaster, and then reset everything.