Sihai network

How to pull out the blister of cupping skin to return a responsibility? How to pull out the fire can

for many Northerners in autumn and winter, they like to pull out a fire pot after bathing in the bathhouse, but some people pull out a big blister when they pull out the fire pot. Do you know what's going on? Do you know the specific treatment method after pulling out the blister?

What's the reason for the blister in cupping

1. Individual physical differences

The constitution of each person is different. Some people have sensitive skin reactions after cupping, and blisters may appear on their skin. Or the body moisture is heavier, blistering can also be seen as a kind of reaction to eliminate the evil from the body.

2. Too long to keep cans

Generally speaking, the time of can retention should be controlled at about 10-15 minutes. When the time comes, the can will be started immediately. Everyone's tolerance is different, and the patient's feelings should be the main factor. If the patient feels burning pain or the filling mouth sucks too tightly, the can should be lifted in advance, otherwise it is likely to form blisters.

3. Too strong flash tank

Flash cupping refers to the cupping method that takes the cupping off immediately after the cupping, so repeatedly, until the skin is flushed and congested.

The strength of the flash tank is too large, which exceeds the skin's bearing capacity. If it is pulled by brute force, it may cause skin damage and form blisters.

4. Tank temperature too high

When burning the pot, the firepower is too large, the pot mouth is too hot, and then it is quickly buckled on the skin, which is easy to burn the skin and form blisters. This kind of situation seldom occurs when the tank is left, generally occurs when the tank is flashed, so when the tank is flashed, pay attention to place the combustor near the bottom of the tank, do not touch the edge of the tank mouth, to prevent the tank mouth from burning too hot and scalding the skin and blistering.

5. Reason for cupping position

The sensitivity and tolerance of different parts of each person are also different. Some parts may be easy to blister, generally speaking, the back, two flanks and buttocks are easy to blister.

Tips:

After the cupping, if the blister is small, do not need special treatment, only apply the disinfectant gauze to prevent it from being scratched; if the blister is large, go to the hospital or clinic, ask the doctor to prick the blister with a disinfectant needle, release the water or use a syringe to prick the edge of the blister to extract the water, then apply the gentian violet medicine water, apply the disinfectant gauze to prevent infection.

Specific treatment method for blister after cupping

If there is blister after cupping, but the blister is small, no treatment is needed. Generally speaking, it will be absorbed by human body in a few days, and the blister will disappear naturally.

Note: if the blister is broken, pay attention to avoid infection, you can choose to apply some Iodophor to prevent infection.

1. Disinfection treatment

If there is blister when cupping, you can sterilize it with regular iodine and alcohol, prick in the edge of the blister with a disposable syringe to remove the tissue fluid, and then smear gentian violet. It is unnecessary to bandage. If there is infection, you can take antibiotics with the knowledge of the doctor.

2. Salt water sterilization

Ingredients: 1 part salt, 2 parts cold boiled water.

Methods: put the salt into the water, mix well, then immerse the gauze into the water, then apply it to the burn and scald area, and replace it at any time.

3. Drug disinfection

Ingredients: Rhubarb proper amount.

Grind rhubarb into fine powder, add sesame oil, mix it into paste, smear it on the affected area, wrap it with gauze, and change medicine once a day.