Refrigerators are electrical appliances that we need every household in summer. Because of the high temperature, food is easy to go bad outside. With the refrigerator, we can extend the freshness of food in a short time. But, you know what? For a long time, there will be a lot of bacteria hidden in the refrigerator, which will cause harm to our human body. Next, let's take a look at how to 'bathe' the refrigerator on a regular basis.
Before we clean the refrigerator, we should cut off the power supply and take out the food in the refrigerator. Pay attention to the food taken out here. Remember to cover it with a thick cloth and put it in an iron basin.
Next, we can officially start cleaning the refrigerator. First, take out the shelf, fruit and vegetable box and bottle frame in the refrigerator,. Then use a rag dipped in water mixed with detergent to scrub accessories. After cleaning, use a rag to dry them. The drawers in the freezer should be drawn out in turn. Then, let the freezer defrost naturally. Remember to put some towels under the refrigerator to prevent the floor from getting wet due to the outflow of defrosting water.
At this time, we will start to clean the refrigerator shell and door body, and wipe the refrigerator shell and handle with a slightly wet and soft cloth. If it is a place with a lot of oil stains, you can dip in some detergent and scrub it. Then, dip a soft cloth in water or detergent, gently scrub the refrigerated inner tank, and then dip in water to wipe the detergent away. When we clean the refrigerator's' switches', 'lights' and' thermostats', please screw the rags or sponges dry.
When the ice in the freezer melts, we can use a towel to wipe it clean. Do not use sharp objects to shovel the ice on the evaporator plate, which is easy to damage the evaporator and lead to refrigerator failure. After cleaning, open the door and let the refrigerator air dry naturally. After the tank in the refrigerator and freezer is cleaned, let's clean the door tank. The door sealing strip is wiped with 1:1 vinegar water, and the disinfection effect is also good. After cleaning, plug in the power supply and check whether the temperature controller is set in the correct position. Run the refrigerator for about 1 hour, check whether the temperature of the refrigerator drops, and then put the food into the refrigerator. At this time, the refrigerator cleaning is finished.
What about? Have you learned how to clean the refrigerator after reading this method? Find a free time to clean your refrigerator quickly!