In the past, in the cold winter, every household would basically use a honeycomb stove. In this way, it can not only keep warm, but also burn economically. Although most of the families use toasters and natural gas now, some of them are still used to the use of the older generation, and put honeycomb on their backs at home. So, how to ignite the honeycomb coal quickly? Next, I will teach you a complete set of steps to ignite honeycomb briquette.
So, how to ignite the honeycomb coal quickly? Next, I will teach you a complete set of steps to ignite honeycomb briquette. Before the coal stove, we must first open the ventilation cover under the coal stove, so as to maintain the oxygen exchange in the air and ensure the continuous combustion of the honeycomb coal. Then, we need to find something that can make a fire, such as short dry wood or waste paper, so that we can ignite it and then plug it into the coal stove to ignite the bottom honeycomb coal.
Next, we are going to start the formal combustion of honeycomb coal. Put the prepared dry wood or waste paper into the coal stove, and then add the first piece of honeycomb coal to the stove, so that the honeycomb coal can be ignited completely. At this time, we need to wait for a period of time until the first piece of honeycomb coal is completely burned, and then use pliers to clip in the second piece of honeycomb coal. Pay attention to the hole of the second honeycomb coal and the first one, otherwise the coal furnace will not continue to burn. Then, after the second coal stove is almost fired, add the third honeycomb coal, which should also be aligned with the previous honeycomb coal hole.
Finally, we can put the kettle on the coal stove to boil water. In the process of boiling water, don't forget to replace the coal stove with new honeycomb coal block after a period of time. When the bottom piece of honeycomb coal turns yellow, it means that you need to add new coal, so as to ensure the continuous prosperity of the fire in the coal stove. Of course, if you need a small fire, you can close part of the bottom ventilation cover, which can help adjust the size of the coal fire to meet our needs in different situations.