4hw.org: when decorating at home, many people will choose wooden floor. I feel that the quality of life has improved in an instant, but although the wood floor has a high texture, daily maintenance and repair are also very important. Do you know how to maintain the wood floor? Let's take a look at it with Xiaobian!
The solid wood floor is easy to clean. You only need to use a vacuum cleaner or dry rag in daily life. You can also use a wet rag to wipe it occasionally. If there is any stain, you can use a soft detergent to easily remove it. Dyeing floor every one to two years need to use the original maintenance wax once, generally speaking, the longer the use time, the more beautiful the surface. Put a mat or carpet under the floor where it is often worn, such as under the living room or desk. Install foot mats under furniture legs to avoid unnecessary wear or scratches.
Note: try not to use metal floor mats, they are easy to leave marks on the floor surface. Do not use a lot of water when cleaning, and try to wring the rag dry. The surface treatment of the floor has been able to protect it from general erosion. Even so, the stains on the floor surface should be removed in time. It should be noted that beech is sensitive to water and should not be soaked for a long time.
How to prevent the wood floor from blackening
Often use wet mop, wet cloth to wipe the floor, the wooden floor is worn for a long time, the paint on the surface of the board is polished, and the dirt is easy to be absorbed by the wood, resulting in the floor blackening. Wood floor should prevent blackening. It's best to put a tread mat in the place where the floor is most worn at ordinary times.
If there is water left on the floor, it should be quickly sucked dry. Oil stains shall be wiped with a cloth dipped with a little detergent. Every six months, a layer of special maintenance liquid for wooden floor can be coated on the floor. Before using the water-soluble resin maintenance solution, clean the floor first, apply it on the floor with cotton cloth, and wipe it with a dry cloth 20 minutes later, then a layer of resin protective film can be produced. This layer of protective film can effectively prevent dirt from being absorbed by the floor, thus causing the board to turn black.