It's the hottest time of the year again. For girls who love beauty, sandals will come out at this time, but the newly bought sandals will easily wear their feet. What can I do with sandals? What's a good way to make sandals not wear their feet?
1. Wine immersion
Pour the white wine (about 25g) into the new leather shoes, shake it several times, put it on for an hour, the leather will no longer be hard, and the shoes will no longer be pinched. If it's the edge of leather shoes to polish feet, such as the heel, you can dry the wet paper towel, and then fully soak the white spirit, fix it on the leather shoes with a clip, and place it for one night, and then wear it the next day, then you won't polish your feet.
2. Pressure method
If the edge of a new leather shoe is partially ground, wet towel can be used to cover the ground part for a few minutes to make it moist and soft. Then the cylindrical object (such as glass bottle) is used to roll and press it several times to make the ground part smooth and even, and the foot will not be ground again.
3. Wedge palm technique
If the new leather shoes are seriously clipped, wet towels can be used to cover the wet shoes, and then the shoes are wedged to support the big shoes, so they can be worn smoothly.
4. Hammering method
If the sole of a new leather shoe is ground, it can be put on the crutch of the shoe, and it can be knocked hard with a hammer, so as to strike the ground foot flat, and what can be done for the new shoe to grind the heel. If there is no shoe crutch, it can also be replaced by other ironware.
5. Solid glue dissolving method
After dissolving with solid glue, drop it onto the decorative nail for grinding feet, and then it will be OK.
You can paste a small piece of soft cloth after the glue and before the glue hardens, as long as you are careful.
6. Newspaper wetting method
Knead the waste newspaper into a ball, wet it (slightly) with water, then pack it with a piece of newspaper, and then put it into the place where the shoes are polished. Make sure it's tight. This method is absolutely useful.
7. Blow method
For a part of the foot grinding, such as the back heel, the side of the toe, which will wear blisters, you can use a hair dryer, blow according to the part of the foot grinding shoes, until the blown leather becomes soft, and then smash with hard things, this method is very good, especially suitable for the shoes with the back heel grinding.
8. Liquor method
It can be applied to the place where the feet are ground in the shoes with white spirit. Soak it for about 5-15 minutes, wait for it to be slightly soft, then put it on for walking, and do not grind the feet after drying.
You can also spray alcohol on the cloth strip until it is wet, then fill the cloth strip with shoes, and wear it the next day.
9. Tape method
Use adhesive tape to stick it on the place where shoes and feet are ground, and it will not be too ground after a period of time.
10. Trampling
Fold the one that grinds your feet inside and dent it. It's like stepping on a slipper. It'll be much better in a few days.
11. Hammering method
Wet cloth covers the place where the feet are grinded, and then use a small hammer to smash it gently and repeatedly to make it soft and gentle, and then wear it without grinding the feet.
12. Anti abrasion paste
Buy a special anti-wear patch for grinding feet, it's a bit like a band aid, but it's much softer.