4hw.com.cn: many people in life are sensitive to smell, especially if there is any smell at home, I wish I could find the source and brush it inside and outside for three times. Some people have lived at home for a long time and found that the floor tiles smell fishy. So how to remove the smell of floor tiles? May as well and small make up understand next!
Why should ceramic tiles be soaked in water
Therefore, the purpose of soaking water before tiling is to fully absorb the water in the pores, so that the water in the tiles will not be absorbed if the cement mortar is applied again. It will not appear hollowing, falling off, crack and other phenomena after paving for a period of time. A good tiling worker will master the time and scale of soaking, especially the bricks with high water absorption, so he must be satisfied!
Some problems that need to be paid attention to in ceramic tile
For the water absorption of tiles, the water absorption & lt; 0.5% does not need to be soaked when tiling, while the water absorption of glazed wall tiles and floor tiles for kitchen and bathroom is generally greater than 10%. It is necessary to bubble when tiling (if it is porcelain wall tiles, the water absorption is less than 0.5%, of course, there is no need to bubble).
How to make tile water
Since it's said that "soaking", then the tiles must be completely immersed in the water. Generally, the construction party will prepare a large basin. However, there are also some irresponsible construction teams, which pile up the tiles and pour water on them with water pipes. In this way, only the tiles can be soaked, and the tiles can't be fully 'Drunk'. After laying, there are likely to be various problems.
How long does it take
Due to the different water absorption of different tiles, there is no specific standard. But the end result is to make the tiles' drink up 'the water and stop bubbling. It takes a long time to soak. Due to the humid air in rainy season, the time should be shortened correspondingly; when the hot weather is dry, the time should be increased correspondingly.
Inspection after paving
After tiling, about a week, you can tap the tiles with a small metal hammer, listen to whether there is echo, and carry out manual inspection. Once there is a situation, you must let the construction team do it again. It's hard to say, or you will surely lose!
How to judge water absorption
The more intuitive method is to drop water on the back of the tiles to see if the water will be absorbed. If the tiles do not absorb water by naked eyes, it means that the water absorption is low.
The reason for the smell of floor tiles
Most of the smell of floor tiles appears on polished tiles. The reason is that in the process of production and production of polished tiles, the surface of tiles is damaged after polishing, which makes the surface easy to seep. If you don't pay attention to it, it will easily seep into the interior of floor tiles.
Of course, the smell comes from mop. After the mop was used, it was not dried in time (or in the air). At this time, the smell of smell will be left on the polished brick or infiltrated into it.
Understand the reasons, and then see how to solve it!
How to deal with the smell of floor tiles
1. After wiping the floor tiles, the floor mop should be dried in time, and it is the best to use disinfectant to eliminate the poison.
2. When mopping the floor, you can add a little vinegar in the water and a little vinegar in the water with washing powder to clean the floor tiles, which can not only remove the fishy smell, but also make the floor tiles look brighter and more clean.
3. Raise some green plants at home. The smell of floor tiles is mainly because the air in the room is not circulating and fresh enough. Raise several pots of green plants, not only to increase the humidity in the room, but also to purify the environment.
4. First use the washing powder, scatter some on the ground, and then use the mop to drag it. Mop the floor and wash the mop at the same time.
5. See if there is something that may cause fishy smell before the floor mop, especially some fish, or meat, or the internal organs of animals. Check it first.
6. You can add more fungicides. If there is a fishy smell, it means that there are certain things that are easy to stink. At this time, bacteria are easy to grow. Or other microbes that can cause all kinds of germs. Disinfection must be necessary.
7. Change a new mop, drag it a few more times, then wash it with water and then drag it again. Basically, the smell can be eliminated quickly.
8. Use some lemonade for sterilization and odor removal.
9. Put some activated carbon at home, which can effectively absorb the odor in the house.
10. Second, the window is often opened to facilitate the volatilization of water on the surface of the brick and prevent it from seeping into the brick body.