How to solve toilet leakage? Many friends must have experienced the leakage of the toilet at home, but it is generally because of the water tank. You should know that the leakage of the toilet is not only wasteful, but also easy to make the toilet wet. So how should the leakage of the toilet be repaired? Let's have a look
Causes of leakage of toilet water tank and maintenance methods
1. The toilet water tank leaks due to the material problem of the water tank
Poor water tank material or old internal parts of the water tank will lead to water leakage of the toilet water tank. The toilet produced by inferior materials is usually not good or bad on the outside. However, some small parts inside may be easily damaged without use. Of course, it does not rule out the aging and deterioration of the toilet water tank that has been used for a long time, resulting in problems in the quality of the toilet water tank and water leakage.
Maintenance method: split the toilet water tank and check it one by one to see whether the parts in the toilet water tank are intact. If some parts are broken, repair them if they can. It is best to replace those that cannot be repaired. If the water tank is too poor, it is recommended to replace the whole water tank to avoid more serious consequences.
2. Leakage of toilet water tank due to failure of drain valve
The toilet drain valve is mainly in charge of the water in the toilet tank. Generally speaking, many situations may cause problems with the toilet drain valve. It may be a series of reasons caused by the cracking and deformation of the installation hole, or the concave convex inequality of the installation surface and careless installation.
Maintenance method: because many professional tools are needed for testing, it is recommended to ask the toilet repairer to carry out professional maintenance as far as possible.
3. The toilet water tank leaks due to the failure of the down pipe
The leakage of the toilet water tank may also be due to the problem of the sewer pipe below. The sewer pipe is a water transmission pipe connected to the toilet water tank. There is a great possibility of leakage of the toilet water tank.
Maintenance method: carefully check whether the interface between the toilet and the sewer pipe is loose or whether the pipe is rotten. If the pipe is rotten, the pipe needs to be replaced. If it is not connected properly, you can use some iron wire or buy some fixing materials to fix it.
4. The failure of the scoop causes water leakage in the toilet tank
When the water tank is full of water, the internal scoop is at what level. If the internal water is full and the water tank is still filling, there must be water leakage. Then pull up and down the clamping position of the ladle by hand to watch the sensitivity of the ladle. If it is not smooth or difficult to move, it means that the ladle has failed.
Maintenance method: you can remove the equipment of the water ladle and clean it. If you don't know how to remove it, put dry water directly in the water tank and wash it with detergent and detergent once. If this can continue to use, if not, it needs to be replaced.
Common causes of toilet water tank leakage
1. Water leakage caused by aging of internal parts of water tank;
2. Leakage at the connection between toilet and downpipe;
3. The toilet itself has cracks and water leakage;
4. There is a problem with the water inlet group or water outlet group of the toilet;
5. The drainage pipe is blocked and the sewage flows back.
Check the causes of toilet water leakage and the solutions
1. Open the water tank and see that the water tank is full and the water flows out of an overflow pipe, it means that the water inlet group is broken. If you hear the sound of water inlet in the water tank for no reason, it means that the water outlet group is broken. This requires maintenance or replacement of the water inlet group or water outlet group.
2. If water leaks from the bottom of the toilet after toilet flushing and is accompanied by odor, it can be determined that the sealing between the drain pipe at the bottom of the toilet and the toilet is not good enough, so it needs to apply sealant again.
3. When the drainage pipe is not unobstructed, the dirt will flow back. In order to deal with this situation, it is necessary to determine whether the drainage pipe is unobstructed. If it is caused by someone who is not unobstructed, it is necessary to ask the product seller to reproduce and install the toilet. This situation is generally not long after the toilet is installed.
4. If there is water seepage on the surface of the toilet, there may be cracks on the toilet itself. The detection method is very simple: first turn off the water inlet valve, then drain the water in the toilet water tank, then add red ink or ink to the residual water tank, wait for 30 minutes, and observe where the water seeps. In this case, it is not recommended to repair the toilet. Replacing the toilet is the only way.