How do you wax the floor? Many families will choose wood flooring when decorating their houses. It should be that wood flooring has many advantages over stone flooring, but wood flooring is difficult to take care of in life and is prone to dryness. So how to wax the wooden floor in daily maintenance? Let's have a look
How do you wax the floor
1. Choose sunny weather for waxing. High humidity and waxing in rainy days will produce white turbidity. When the room temperature is below 5 ℃, the floor wax will harden. Before waxing, do not use a rag containing chemicals to wipe the floor, which will lead to poor adhesion of floor wax.
2. Remove the garbage and dirt on the floor surface. Use a vacuum cleaner to remove garbage and dust from the floor surface. Wipe the stains on the floor with diluted neutral detergent. Stains that are difficult to remove can be wiped with Xinna water. In order to prevent detergent from accumulating in the groove, the dishcloth soaked with detergent shall be wrung dry as far as possible. Floor wax remover will cause marks and swelling on the floor. It must not be used.
3. Wipe with a wrung dry rag. Wipe with a rag that has been forced to dry. The floor surface, especially the groove part, shall be wiped carefully without residual detergent. Such as residual detergent and water, it will cause surface whitening and bulging.
4. Fully dry the water on the floor surface and groove part, and wax only after it is completely dry. According to different seasons, the time required also changes, but it will take more than half a day. If it is not fully dried, the floor wax will not adhere closely to the floor surface, affect the appearance and produce whitening.
5. Waxing method shake the container containing floor wax and stir it fully. Before the overall waxing of the floor of the room, local trial shall be carried out at the corners of the room and other unobtrusive places to confirm whether there is any abnormality. In order to prevent the floor wax from polluting the wall skirting line and furniture, the above parts shall be covered with adhesive tape paper. Fully dip the floor wax with a clean rag so as not to drip. Do not pour the floor wax directly on the floor, otherwise it will produce marks and circle marks. Apply it carefully according to the wood grain direction of the floor, without omission or uneven thickness. Too little application will lead to uneven thickness, and too much application will lead to poor film formation. Keeping thin, thick and uniform is the key to waxing. Do not dilute floor wax with water. The waxing tool can use special waxing mop, which is simple to operate and has ideal effect.
Simple waxing tips for families
First, scrub the wooden floor and wax it after it is dry. Remember. Put the bought wax into the iron can, bake it in the stove, and then slowly mix kerosene into the iron can. Note that the ratio of wax to kerosene is 122.5:l. Stir while mixing until it becomes shoe polish. Then use a clean cloth. Note that the cloth must be dry. Dip in wax oil and apply it on the ground. The wax oil shall be applied evenly and not too thick. After coating 2 ~ 3 square meters, stop for 2 ~ 3 minutes, and then touch it with your hand. If it does not stick to your hand, immediately wipe it with another clean dry cloth. It only takes a few times to appear luster.