How to maintain the solid wood composite floor installed in the house? In fact, it is the most important thing to pay attention to in wet weather. Let's teach you how to maintain the solid wood composite floor.
I. keep a certain humidity in the room and avoid long-term water immersion
1. In order to increase indoor air humidity in autumn and winter, humidifier can be used to keep indoor air humidity at 40% ~ 80%.
2. If the outdoor humidity is greater than the indoor humidity, close the doors and windows to keep the indoor humidity low. If the outdoor humidity is less than the indoor humidity, open the doors and windows to reduce the indoor humidity. In case of humid and hot weather, you can turn on the air conditioner or electric fan.
II. Prevent exposure to the sun or high temperature drying to avoid deformation, cracking and other phenomena
1. Try to avoid exposure to strong sunlight for a long time, or sharp rise and fall of temperature in the room, etc., otherwise it may cause premature aging of three-layer solid wood composite floor paint surface. If the room is often in the sun, curtain is recommended.
2. In case of water immersion in the area or blistering by the director of the Bureau, if there is any open water detained, it shall be dried with dry cloth in time and allowed to dry naturally. It is strictly prohibited to use electric heater to dry or expose to the sun.
3. Do not make the floor contact with open fire or directly place high-power electrical appliances on the floor.
III. prevent hard objects from scratching the wear-resistant layer, so as to prevent the moisture-proof function and brightness of the floor from being affected
1. Attach soft bottom protective pads to the feet of furniture. How can we save money on decoration? Go to home decoration net and design budget quotation for free. Avoid furniture 'feet' scratching Floor wear-resistant layer, do not let heavy objects damage wear-resistant layer.
2. When moving furniture, do not push or pull directly on the floor, but lift, move and handle it gently.
3. When walking on the floor, wear cloth slippers as much as possible, preferably barefoot.
4. Do not use sandpaper, grinder, steel brush, strong decontamination powder or metal tools to clean composite wood floor.
IV. daily cleaning, keep the floor dry and clean
1. At ordinary times, you can use a vacuum cleaner or broom to clean the dust on the surface, and then use a cloth or mop to wipe the floor surface which is not dripping after being soaked. After mopping the floor, it is better to open the doors and windows to let the air circulate and blow the floor dry as soon as possible.
2. For the cleaning of light colored composite wood floor, dip the mop in the rice washing water and wipe it directly on the floor, or spray the rice washing water evenly on the wood floor (not too much), and wipe it with a dry mop for 5 minutes.
3. Oil stains, paints and inks can be wiped with special degreasing oil; blood stains, juice, red wine, beer and other residual stains can be wiped with a wet rag or with a rag dipped with a proper amount of floor cleaner; it is not allowed to clean with strong acid-base liquid.
4. Maintain once a year with liquid maintenance fluid. Before maintenance, clean the floor first, and then evenly apply a layer of maintenance fluid on the surface. After drying, wipe with a soft cloth until it is smooth and bright.