Four seas entertainment news: there are many friends will encounter the situation that the WiFi connection of notebook computers is limited. What's the matter? Here's the reason why the WiFi connection of notebook computers carefully arranged for you by Xiaobian is limited. Let's have a look. If restricted, your IP address may be in conflict. Go to local connection settings. There may be a problem with your router's wiring. Just go into the router settings and have a look. Or. The network cable is in poor contact.
≫ & gt; & gt; click next to see if WiFi is restricted
The reason why the WiFi connection of laptop is limited
If restricted, your IP address may be in conflict. Go to local connection settings. There may be a problem with your router's wiring. Just go into the router settings and have a look. Or. The network cable is in poor contact.
In case of IP conflict. It is set in local connection. It is usually acquired automatically. If you are fixed IP. Then ask the person who helped you get the IP first. Router problem. Just look at the router's instructions. Enter 192.168.1.1 in the web page, which is usually this. Enter the router settings page to test or reset. What about the network cable. Just try the cable.
What to do if WiFi is restricted
Solution 1
Right click the WiFi signal icon in the lower right corner of the desktop.
Open 'network and sharing center'
Click the connected WiFi, as shown in the figure.
Find the IPv6 and IPv4 connection options.
Then click 'wireless properties'.
Change the above option to 'Auto acquire IP and DNS servers'.
Solution 2
First, find the network connection icon in the lower right corner of the desktop
Step 2: right click, click 'open network and sharing center', click 'change adapter'
Step 3: Find 'wireless network connection' (find the WiFi you want to connect), right-click the attribute
Step 4: find "Internet Protocol version 4" in "network", click, and then click "properties" to check whether the IP address and DNS server address are obtained automatically. If so, look at step 5; if not, change the IP address and DNS server to get it automatically. Then see if you can get online.
Step 5: select 'use the following IP address', then press the change in the picture (DNS: 192.168.1.1 is OK), and finally click OK
Step 6: try again whether you can get online or not. Disconnect WiFi first
Finally: follow the previous steps to change the IP address and DNS server of WiFi to be connected to automatic acquisition, and click OK. Then connect WiFi, that's all.