Now many people will use their leisure time to drive around the city. At the same time, we all know that in order to drive more safely, most people will choose to take the high-speed, but recently in Luoyang, someone else has been rubbing etc? What's going on?
Recently, local netizens' go with the wind 'met with the situation of being rubbed etc. The reporter interviewed and learned that this situation does exist. Once this situation occurs, the cars that rub etc and the cars that are rubbed etc can't get on and off the highway normally, especially the cars that rub etc maliciously will also be blacklisted by the high-speed charging units and restricted to get on the highway. So, how to prevent your etc from being rubbed? The reporter interviewed relevant departments.
At the next stop, a netizen was scratched by a car in front of etc. he had no choice but to change to an artificial channel
On April 28, the netizen "went with the wind" posted on the local forum that when he was driving in Jianxi toll station to get off from the etc special channel, a car in front of him was waiting for the chance to pass. He suspected that the car in front was not equipped with etc, so he had to drive instead of using the manual channel. According to the verification of toll station staff, although his car did not get off the station through the etc special channel, it has been deducted through the ETC system. In this post, some netizens and commentators said: 'I heard for the first time that this (etc) can also rub! '
Many citizens understand the traffic principle of etc special channel, that is, when the vehicle equipped with etc goes through etc special channel, the special equipment above the channel senses the vehicle information, and uses the computer networking technology to carry out background settlement with the bank. After the settlement is successful, the barrier bar in front of the vehicle rises automatically, and the vehicle can pass through the toll station smoothly.
So, here comes the question! Since it's one car, one sensor, how can the etc be rubbed? The reporter then contacted the netizen, but no response was received. As for the netizens' response, the relevant person in charge of Luoyang toll station of Lianhuo Expressway said that there was no more evidence for further identification, but they did find the situation of rubbing etc in their daily work. Is there something wrong with etc? How to avoid being rubbed?
Although etc works in one car and one sensor, there are some cases that may cause false rubbing
The morning before yesterday, the reporter saw at the exit of Luoyang toll station of Lianhuo expressway that the warning sign of "keep 5m distance" was set above the three etc special channels. After entering the etc equipment sensing area, the vehicle was still 10-15m away from the front bumper.
The person in charge of the toll station said that although etc can sense one vehicle, it is machine monitoring. When the vehicle enters the sensing area and senses successfully, the bumper will lift automatically. If another vehicle is suddenly inserted into the channel at this time, the back car will swipe the card to the front car. In addition, if the etc equipment of the front car breaks down, after passing through the sensing area, the car bar does not rise. At this time, when the rear car is too close to the sensing area, the gear bar will also rise. Once the front car passes, it also belongs to the etc of the rear car.
'the first situation above is often malicious rubbing etc. we haven't found this situation yet. In order to prevent this kind of queue jumping against etc maliciously, most high-speed toll stations in Luoyang area have extended etc special channel guardrails. "The person in charge said that at present, the etc disputes they have received mostly belong to the second situation after investigation, that is, the etc in the front car has a fault and is rubbed by mistake, such as the balance in the etc card is insufficient, the owner disassembles etc equipment without permission, etc., which will affect the induction. How to prevent the etc from being rubbed and missed? Toll station staff give a reminder
How to prevent the etc from being rubbed and missed? Toll station staff give a reminder
In fact, no matter by mistake or by rubbing etc, it will affect the normal up and down speed of the vehicle. So how to deal with the situation of etc being rubbed? The person in charge said that in case of such an accident, the toll station staff can be contacted in time for verification, and the toll station staff will be allowed to pass after verification. The toll station will inform the license plate number of the vehicles that have maliciously rubbed against others' etc. if these vehicles refuse to pay the toll, they will be blacklisted and can't go on the highway.
The staff reminded that to prevent the etc from being scratched or scratched, the following two aspects should be paid attention to: first, the driver should check whether the on-board etc equipment is normal before going out, such as whether the etc card is inserted firmly, whether the balance in the card is sufficient, etc.; second, when using etc to pass through the high-speed toll gate, the driver should try to maintain a distance of more than 10 meters from the front vehicle, and slow down to ensure that the etc equipment on the vehicle can sense smoothly , safe passage.