We usually have friends who smoke, so it's hard to avoid buying fake cigarettes. Now there are too many fake cigarettes. Some fake cigarettes have a high degree of simulation. If we are not careful, we will buy fake cigarettes. How can we identify the real and fake cigarettes? Now let's listen to the experts.
One touch:
Cigarettes, whether soft or hard, are wrapped with transparent film. When consumers buy cigarettes, the first contact is this layer of packaging.
Real cigarette: the plastic film feels smooth, transparent and glossy. It is a special kind of film, which is only used for cigarette packaging. If you take it apart and touch it again, you will feel that the outer packaging film is thin and soft.
Fake cigarette: it uses a general film with poor luster. If you look at the cigarette case through the film, you will feel poor transparency. If you touch it with your hand, you will feel sluggish. If you touch it again after taking it apart, you will feel that the film is thick and hard.
Second, look at:
From the color identification. Consumers who often smoke one kind of cigarette should pay attention to comparing the color of cigarette case when buying cigarettes. If possible, when you buy cigarettes next time, you might as well take the real empty cigarette case with you. No matter how lifelike the fake cigarette box is, it still has color difference with the real cigarette box.
It can be identified from cut tobacco. Some people mistakenly think that the more yellow the cut tobacco is, the better the quality of the cigarette is. In fact, this is a misunderstanding.
Real tobacco: the color of real tobacco is natural, yellow and black. Generally, there is no untreated stem in cut tobacco, because the untreated stem is not easy to burn and easy to extinguish. Regular manufacturers in the production of tobacco stems were puffed.
Fake tobacco: in order to confuse consumers, sulfur smoked tobacco is generally used, and the cut tobacco appears yellow and bright. Tobacco stems are often seen in fake cigarettes. It is impossible for the manufacturer to make efforts to puff the stems. It is a special process and needs to buy high-end equipment.
From the ash. After the general consumer smokes, sees the ash to be whiter, then thinks is the good cigarette. In fact, this is also a misunderstanding. In fact, the color of soot is affected by the drying degree of tobacco leaves. When the tobacco leaves are dry, the soot will be gray white after burning, otherwise it will be black and difficult to smoke.
From the ash to see the true and false smoke, should be observed in the combustion, whether there is a stem in the cut tobacco, when the stem appears, the cigarette is difficult to smoke.
Three inhibitions:
Smoking cigarettes is an effective way for consumers to identify the authenticity of cigarettes. General consumers smoke a kind of cigarette for a long time, the taste suddenly changes greatly, and they may encounter fake cigarettes.
Real smoke: the general formula is stable, and the taste is also stable. Regular cigarette factory a variety of cigarettes, the selection of materials are exquisite, formula is also developed for a long time. Although the source of tobacco may come from different regions in China, the stability of taste can be guaranteed by the comprehensive formula according to 40 grades of cut tobacco ingredients.
Fake cigarettes: it's impossible for counterfeiters to take into account the taste. If they can paste them into similar cigarettes and exchange them for money, everything will be fine. It can also be said that fake cigarettes all taste the same.
4. Demolition:
Through the above way, it is difficult to identify the authenticity of the cigarette, the most direct way is: open!
It is a more direct way to open the packing box and identify from the way of viscose.
Real cigarettes: packaging boxes are produced on a large scale by machines. The glue on the machine is dot like glue. The glue on both sides of the cigarette case is uniform, regular and fixed.
For example, there are three fixed points on the side of each cigarette case, and the spacing of each glue point is equal, about 10 cm. The glue on both sides of a pack of cigarette case is in the way of dispensing. If you tear it open, you can see the orderly arrangement of glue marks, 2-2.5mm apart. The glue marks on both sides are also very symmetrical.
Fake cigarettes: they are all artificially glued and brushed with brushes. Take it apart, you can see the traces of the brush. The glue marks on both sides of the cigarette case are also asymmetric, which is very random.
Anti counterfeiting professionals say that it is the most effective way to open the cigarette case to identify the authenticity, which is suitable for all kinds of counterfeit cigarettes.
Another way to identify after opening is to look at the lining paper. Each pack of cigarettes has platinum paper in metallic color. After opening the cigarette case, you need to open the platinum paper to get the cigarette. In the opening place, there is stress, the real cigarette platinum paper only has two points to connect, other parts are completely cut, it is easy to open. When the false cigarette platinum paper is opened, the middle is serrated, and the opening is rough and uneven.