These days, is it because of the Xi'an female graduate student Mercedes Benz oil spill? For many car buyers, their knowledge of the vehicle is almost zero, so what kind of inspection should they do when buying a new car? Don't be fooled by the people in the 4S shop!
1、 Body appearance
First of all, try to park the car in a place with plenty of light. Only in this way can we find some small defects on the body paint. Some 4S stores will check the car indoors, but the light in the garage is often poor, so it is necessary to drive the car to a place with plenty of light for inspection. Can focus on observing the bumper and body gap, door gap, open the door to observe whether there is no color difference inside and outside paint. It should be noted that when some stains on the car do not dare to confirm whether they are scratches, it is best to find a wet cloth to wipe, and do not use your fingers to pick. The gap between the door, bumper and hood is basically the same. If the gap is too large or the width is not consistent with other cars, it may be repaired later.
2、 The whole body glass of a car
Pay attention to whether there are relevant marks on the lower right corner of the car window. Only the original glass will be marked to prevent the glass from being replaced artificially in the late factory. Secondly, there is a unique engine number and frame number on the nameplate of each vehicle. Check this number with the code on the certificate to ensure that the code is consistent. This is the same concept as the "three codes in one" that is often used when buying a mobile phone. In addition, check the delivery date on the nameplate. The difference between the delivery time and the delivery time should not be more than three months, because the viscosity of the engine oil will change if the vehicle is left standing for too long, and some lines are prone to aging and rusting. So to see the glass production date, the date of the name plate and the certificate must be consistent.
3、 Tire inspection
A normal new car tire should have no damage to the tire wall, especially the front tire wall. There should be no nail marks on the tread, and the front and rear tire hairs are healthy. If there is no trace of the tire hairs on the front and rear wheels, but the odometer is only a few kilometers away, you should deeply doubt whether this car is really a new car. Secondly, it is necessary to check that the production dates of the four tires must be the same. You can also take a look at the brake discs. Some of the brake discs are rusty and may be vehicles with a long inventory time.
4、 Inspection of other items
It should be noted that the battery connector of some models is loose at the factory. When checking the car, you should check it, tighten the connector to prevent it from falling off, and then check all kinds of lights, such as side lights, low beam lights, high beam lights, fog lights, turn signals, brake lights, reversing lights, high position brake lights, instrument panel lights, door lights, reading lights, make-up lights, storage box lights, trunk lights, etc. Although it looks very complicated, I still hope to check patiently. Lighting is an essential element to ensure driving safety. The fire extinguisher, tools on board and spare tire are placed in the car, and they are usually isolated by lining plate. We should pay attention to check whether they are complete and fixed reliably. It is important to pay attention to the size and specification of the spare tire and the brand of the tire. Some spare tires are not full size and should be checked with the configuration table. It's a happy thing to buy a new car. I hope you can check the car carefully so as not to cause unnecessary trouble if you find problems in the future!