After long-term use of shower head (shower), it will be blocked, which is very natural. In fact, it is because of the long time of scaling, so how to clean the shower?
Many people may find it troublesome to remove and clean the shower head. In fact, the operation is very simple. It does not require you to completely remove the shower head one by one. The shower head (shower) is nothing more than a water outlet cover and handle. If your home can adjust the size of the water, there should be a software circle in the middle. You close it tightly and rotate it counterclockwise (or clockwise) so that it can come out. If your home is not adjustable water size, it is basically not open, because most of those are welded with plastic (ultrasonic) welding.
Now let's learn how to clean the shower head (shower)!
If some of the small holes in your shower are blocked, put water first to see which holes are blocked. Then you have to turn on the shower head and see that there are many small holes on the shower head like the shower head. This is where the water comes out. Then, we will prepare a needle first, and then use the needle to pierce the impurities in the hole without water until there are no impurities in the hole. This method is the most direct, but be careful to prick the shower hole.
Secondly, we can use white vinegar to clean the shower head (shower), which is also commonly used in families. After we remove the shower head, we put it into a small basin filled with white vinegar and soak it for about two hours. After soaking, we can brush it with a toothbrush and then clean it with clean water. If there is hard water sediment, we can use lemon slices to scrub it.
However, when cleaning the shower head (shower), special attention should be paid not to use strong acid (preferably white vinegar), so as not to cause corrosion to the surface of the shower. In order to ensure that the shower head is not blocked, we'd better clean the shower head every half a year or less, so that you don't worry about the sudden blockage of the shower head, which will affect your mood.
At the same time, in order to ensure the service life of the shower head (shower), we had better not install it directly under the Yuba, and the distance from the Yuba should be more than 60cm, and often use a soft cloth to stick a little flour to wipe the surface of the shower, so that it is still as new as before.
But if the metal of your shower is rusty and the blockage is very serious, WD-40 rust remover and antirust lubricant must be used. This rust remover has excellent affinity and permeability with metals. The rust layer can be separated from the metal layer. Make the rusty part contact with the metal and leave a protective film. Let the shower never rust.
If the shower in your home is still good now, you can't take it lightly. You should start with prevention. Usually we should develop a good habit of taking a shower. Before the end of each shower, use a towel to clean the shower outlet to prevent the remaining scale.
If your home shower has been a certain number of years, and the appearance is relatively old. It's better to replace a new shower. It's not good for your health to continue to use this kind of shower. There may be a lot of harmful impurities in it.