Sihai network

What's the matter with Haier washing machine without drainage? What are the reasons why the washing

Washing machines have been widely used in every family. In winter, without the help of washing machines, it will be very difficult to wash clothes. But what is the cause of the non drainage of washing machines? What are the causes of the non drainage of washing machines?

One of the reasons why Haier washing machine does not drain water:

The mechanical failure causes the washing machine not to drain water. Generally, the failure can be divided into two situations, namely, the parts such as drain valve and drain electromagnet are loose or the tension spring of the valve core of the drain valve is broken.

The second reason why Haier washing machine does not drain water:

The brake is not released, and the motor load is too large to start. At this time, you can hear a buzz. Adjust the drainage pull rod. For some models, check whether the puller cable is loose from the drain valve; if the nut is not loose or the cable is not loose, the puller may be damaged and the drain valve core cannot be opened, then replace the puller.

The third reason why Haier washing machine does not drain water:

Open the back cover of the washing machine to make the washing machine enter the dehydration program. Observe whether the drain valve is pulled open by the tractor. If not, it may be the computer board fault or the tractor fault; If it is observed that the drain valve core is opened but not drained, the drain pipe is blocked. In most cases, the inlet of the drain valve is blocked. Take out the sundries to remove the fault.

The fourth reason why Haier washing machine does not drain water:

Whether the drain pipe has been put down, whether the end of the drain pipe is immersed in the water or the end of the drain pipe is sealed in the sewer, whether the rubber sealing ring in the drain valve seat is blocked by dirt, whether the drain pipe is more than 15cm higher than the ground, whether the extended drain pipe is longer than 3cm or the diameter is too thin. If these problems occur, the washing machine will not be able to drain water.