Sihai network

What about fogging the mechanical watch dial? How to deal with the mechanical watch dancing?

When the mechanical watch is in some high temperature and humid environment, what should be done when the mechanical watch is foggy? Follow the editor to learn the specific solution. For many mature male readers, the matching mechanical watch is also a symbol of identity.

How to deal with the foggy mechanical watch

1. First pull out the crown to make it face up, and let the water vapor evaporate and discharge by itself.

2. If the mechanical watch is damped, wrap the watch tightly with several layers of toilet paper or lint cloth with strong moisture absorption, place it at about 15cm of the 40 watt bulb accessory, and bake for about 30 minutes. Pay attention not to be too close, or put the watch cover close to the fire to bake directly, so as not to heat the watch cover and deform.

3. The moisture-proof agent, also known as desiccant, in the food bag bought at home opens the silica gel particles together with the watch and puts them in a sealed container. Take out the watch and the water will disappear. This method is simple and economical, without any damage to the accuracy and life of the watch. The desiccant silica gel particles, which have absorbed water for many times, can be dried for several hours at 120 ℃, with renewable water absorption capacity and can be used repeatedly.

4. The hot air of a small 15 Watt household hair dryer is about 20cm away, and it takes about 5 minutes to blow. In this process, the crown needs to be pulled out to make it face up. With the help of the hot air, the water vapor can be discharged.

Does the mechanical watch have a great influence on fogging

Is watch fogging really a big problem? Maybe it is. It depends on whether the watch's waterproof protection works properly. Most of the watch parts are metal, so there are inevitably cracks. Therefore, rubber with better elasticity will be used to fill the gap and enhance the waterproof performance of the watch. However, the rubber ring will age, each person's wearing situation is different, and each watch's waterproof performance is different. The water resistance of a watch is not constant.

Why does the mechanical watch fog

There is fog in the watch, indicating that there is water in the watch. If there is only a small amount of water in the watch, it cannot be observed by the naked eye. Although the watch has been sealed, but with the aging of time, the waterproof ring is damaged, and there will be very fine pores at the joint of the handle and the handle tube, the joint of the back cover and the case, and the joint of the case and the case. When washing hands, washing clothes or in rainy days, water vapor can be soaked into the case from these pores. In addition, in summer, the temperature is high, the humidity is high, or go to the sauna to steam. If the watch suddenly gets cold, the air with more moisture in the watch will condense into fog or water drops, which will stick in the watch glass.