502 glue is what we will use in our life. It's very sticky, so it's likely to stick to our hands if we're not careful. So what should we do if we accidentally stick to our hands with 502 glue? Let's get to know.
1. The insulating oil is applied to the bonding oil in some transformers with the cover, and then it is applied to the glue part, so that the solidified 502 will soon become soft, and it can be rubbed off after it becomes soft.
2. A lot of girls have nail washing oil at home. If you accidentally get the glue on your hand, you can try using nail washing oil. Rub it lightly with cotton, and the glue will wash off immediately.
3. It can also be used to test the essence, and the effect is good.
4. Gasoline and gasoline also have this effect. Use gasoline to soak in the place where it is stuck to the glue. 5. If banana water is glued to wood, it can be removed by scrubbing with banana water. 6. Acetone, xylene, etc., can be wiped off with acetone after the glue is stuck. (if a large area is stained with glue and acetone is applied, it can be removed after about 5-10 minutes. )
7. Warm boiled water can also drop with warm boiled water.
8. It's said that when frozen in the refrigerator, the glue will fall off. You can try it first.
9. Vinegar and vinegar removal method: evenly apply vinegar on the adhesive with cotton swab. When the vinegar is dispersed, scrape it back and forth with cotton swab on the adhesive, and the adhesive will peel off. Drop 502 on the original place to make the original 502 melt, and the solidified 502 glue will slowly become soft, and then quickly wash off with water.
10. This method of cold water bubble must grasp the opportunity, that is, it must be used before the glue is completely dry. When the glue is just dripping on your hand, quickly put your hand into cold water and soak it for a few minutes. Then you can see that the glue becomes a solid, and then buckle it off your hand.
Method to prevent 502 from sticking hands
1. Apply the powder. If your work is often used 502, in order to prevent glue from sticking hands, put the powder or powdery powder on your hands ahead of time, or simply rub the earth on the floor. Glue drops into your hands can only stick to the powder material on your hands, and you have nothing to do with your hands.
2. Gloves with cotton gloves can prevent glue from dripping on your hands, but not all gloves can play a protective role. If the gloves are rubber and plastic, the glue will melt the gloves, release heat, and may burn your hands. So gloves should be made of cotton.
3. Another simple way to moisten your fingers is to sprinkle some water on your hands. When the glue meets the water, it quickly becomes solid, and it can't touch your skin or stick to your hands at all.
The copyright belongs to the author.