The hot summer came in a flash. Do you have a good plan for the season of mosquito breeding? Many people will order a plate of mosquito repellent incense indoors, but is it easy to break when they separate mosquito repellent incense? What are the skills for removing mosquito repellent incense?
How can disk mosquito repellent incense be disassembled without breaking
Take out a plate of mosquito repellent incense. The mosquito repellent incense itself must be rigid. If it was left over from last year, it is likely to break. Of course, people who can remove mosquito repellent incense are OK. The method is as follows:
1. Gently grasp the mosquito repellent incense and loosen its periphery. Turn the two ends of mosquito repellent incense against each other and gently open them. Now there is only the part stuck together in the middle. Do not use force. It is the most tight and easy to break. The mosquito repellent incense is interlaced. When it's about 90 degrees, it's separated in the middle.
2. Take the mosquito repellent incense with both hands, be sure to hold it steadily, and use your left and right hands to push the middle 'beak' open with your thumb in the opposite direction. After breaking it off here, it's easy to break it off from inside to outside, layer by layer. Remember, use force in the opposite direction, and the closer to the center, the more careful and lighter it is.
Note: it's OK to break it from the outside to the inside. It's OK, but the harder it is to break it from the center, and when it's half way to the center, it will break by accident.
3. Slowly move the position of one plate of mosquito repellent incense, and separate the two center positions in a straight line. One plate does not move, the other plate rotates, and the two plates are separated.