it's summer for Meimei to wear sandals again. Do all kinds of new sandals dazzle you? But the new sandals are easy to wear. Do you know what's going on? Here's how to prevent the new sandals from wearing. Let's take a look. In summer, I will never be afraid of sandals.
1. Wine soaking
Pour the white wine (about 25g) into the new leather shoes, shake it several times, put it on for an hour, the leather will no longer be hard, and the shoes will no longer be pinched. If it's the edge of leather shoes to polish feet, such as the heel, you can dry the wet paper towel, and then fully soak the white spirit, fix it on the leather shoes with a clip, and place it for one night, and then wear it the next day, then you won't polish your feet.
2. "Pressure method"
If the edge of a new leather shoe is partially ground, wet towel can be used to cover the ground part for a few minutes to make it moist and soft. Then the cylindrical object (such as glass bottle) is used to roll and press it several times to make the ground part smooth and even, and the foot will not be ground again.
3. Wedge palm technique
If the new leather shoes are seriously clipped, wet towels can be used to cover the wet shoes, and then the shoes are wedged to support the big shoes, so they can be worn smoothly.
4. Hammering method
If the sole of a new leather shoe is polished, it can be covered on the shoe crutch, and it can be knocked hard with a hammer to make the polished part smooth. If there is no shoe crutch, it can also be replaced by other ironware.
5. Solid glue dissolving method
After dissolving with solid glue, drop it onto the decorative nail for grinding feet, and then it will be OK. You can stick a small piece of soft cloth before the glue hardens, as long as you are careful.
6. Newspaper wetting method
Knead the waste newspaper into a ball, wet it (slightly) with water, then pack it with a piece of newspaper, and then put it into the place where the shoes are polished. It must be plugged. This method is absolutely useful.
7. Blow method
For a part of the foot grinding, such as the back heel, the side of the toe, which will wear blisters, you can use a hair dryer, blow according to the part of the foot grinding, until the blown leather becomes soft, and then hit with hard objects, this method is particularly suitable for the shoes with the heel grinding.
8. Liquor method
Apply white wine to the place where the feet are ground in the shoes, soak for about 5-15 minutes, wait for it to be slightly soft, then put it on for walking, and do not grind the feet after drying. You can also spray alcohol on the cloth strip until it is wet, then fill the cloth strip with shoes, and wear it the next day.
9. Adhesive tape method
Use adhesive tape to stick it on the place where shoes and feet are ground, and it will not be too ground after a period of time.
10. Stampede method
Fold the one that grinds your feet inside and dent it. It's like stepping on a slipper. It'll be much better in a few days.
11. Hammering method
Wet cloth covers the place where the feet are grinded, and then use a small hammer to smash it gently and repeatedly to make it soft and gentle, and then wear it without grinding the feet.
12. Anti abrasion paste
Buy a special anti-wear patch for grinding feet, it's a bit like a band aid, but it's much softer.