Refrigerator is one of the most common household appliances, which can ensure that the food will not go bad, but if the refrigerator is used for a long time, it is easy to build a thick layer of ice on the inner wall, so how to remove the ice in the refrigerator? What's the best way to remove the ice in the refrigerator?
How to remove the ice in the refrigerator:
1. According to the size of the refrigerator, cut a piece of slightly thick plastic film and paste it on the frosting wall of the refrigerator without any glue. It can be pasted immediately. When removing the ice, take out the food in the refrigerator temporarily, remove the plastic film and shake it for a while, then all the ice will fall off, and stick a film again, put the food in, and continue to use.
2. Unplug the power supply of the refrigerator, and the ice will melt naturally overnight. Before it is melted, use a wooden shovel or plastic shovel to remove the remaining ice and then clean it.
3. The following methods can also be used for quick defrosting. First, disconnect the power of the refrigerator and take out the food in the box. Then, according to the size of the freezer, put one or two aluminum lunch boxes with boiled water into the freezer. After a few minutes, the frost on the wall of the freezer begins to fall off. If it hasn't fallen off, you can use your hand to gently pull it.
4. If there is no metal evaporation plate on the top of the freezing chamber, the lunch box with water in it should be covered to prevent the plastic inner wall from deforming due to sudden temperature rise at low temperature. This method is much more time-saving than power failure self heating defrosting.
At the end of each defrosting, it is best to use a small piece of cloth or cotton yarn dipped in a little edible oil to smear on the wall of the freezer, so that the next defrosting will be much easier.