Sihai network

Automobile experts teach you how to shift your gears

The key to driving a car in manual gear is to shift gears. The key is to shift gears in time according to the driving speed of the car, and to be fast and accurate, so as to drive more freely. Next, I'd like to tell you a few skills of manual shifting, hoping to be useful to you!

Shift according to the speed of the car. Generally, start to shift to first gear, and then shift to second gear after driving for several meters; shift to third gear when the vehicle speed reaches 20-35; shift to fourth gear when the vehicle speed reaches 35-45; shift to fifth gear when the vehicle speed reaches 45-35. The above is an ordinary five speed vehicle. For vehicles with six or more gears, one gear can be added for every 15 mph increase in vehicle speed. In addition, watch the engine speed when shifting. It is best to shift in time when the speed is around 2500. Sometimes I find the vehicle shaking when driving, which means that the engine is running at low speed and high load, and I need to immediately reduce one or two gears according to the actual situation.

At the same time of shifting, the clutch and accelerator should be well matched. When the clutch is pressed low and tight, release the accelerator pedal, and then quickly shift to the corresponding gear. Release your hand immediately after changing gears. Don't put it on the gearshift lever (commonly known as gear target) for a long time, otherwise it is easy to damage the gearshift lever.

Master the correct shift hand type. Many drivers tend to ignore the hand type of shifting, and sometimes shift with two or three fingers, which is very irregular and unsafe. The correct shift hand type is to cover the head of the shift target with the palm downward, hold the shift target with five fingers, and then shift.

Familiar with the special reverse gear method. Different vehicles have different ways of engaging reverse gear, some of them push right and pull down to engage; some of them push left when they are in the first gear, that is, push left and engage again when they are in the first gear; some of them need to lift the button under the gear target with middle finger and ring finger, and then push left and engage again when they are engaged in reverse gear; others need to press the gear target, and then pull down to engage Shift left forward or right backward into gear.

The above is the problem of how to shift gears manually brought by Xiaobian. I hope that after reading it, it can help you to drive a manual gear model more easily!