If the watch we usually wear is used too long or damaged and the seal is not good, we will find that there will be a layer of fog on the dial. So what should we do if there is fog in the watch? Let's find out!
What if there is fog in the watch?
With a watch on the other hand, you can let the side of the clock stick to your hands, and your hands are warm, so that the fog inside will be forced out.
There are hot water bags at home. It's cold in winter. If you stick a hot water bag on one side of your watch, you can get rid of the water vapor inside.
How to deal with it more effectively?
1. If the watch is soaked in water, it can be tightly wrapped with several layers of toilet paper or absorbent flannelette, placed about 15 cm near the 40 Watt lamp bulb, baked for about 30 minutes, and the water vapor in the watch can be eliminated.
2. Put it in a rice bowl and bury it deep in the dry rice for a period of time. If it's fast, you can see the obvious effect in one night.
3. A kind of granular material called silica gel can be put into a closed container together with the watch that has accumulated water. After a few hours, take out the watch and the water will disappear completely.
4, blow dry with a hair dryer, and then apply a layer of transparent nail polish.
5. If there is water vapor in the watch, you can put it on your wrist with the cover facing inside and the bottom shell facing out. The water vapor can be eliminated in two hours. If there is too much water in the meter, the case must be opened for scrubbing. If you can't handle it yourself, you should send it for repair in time.
Why is there fog in the watch?
There is fog in the watch, indicating that there is moisture in the watch. In general, although the watch is sealed, there will be very small pores at the joints of the case, especially for the used watch. When washing hands and clothes or in rainy days, water can enter from these pores, especially the hot steam in the kitchen, which is easier to soak into the watch case. In addition, in summer, the temperature is high and the humidity is high. If the watch suddenly gets cold, the air with more moisture in the watch will condense into fog or water drops and stick in the watch glass. If there is fog and water drop in the meter, it should be repaired in time, and the fog and water drop should be removed to prevent the machine parts from rusting and the surface from discoloring. If there is a little fog occasionally, it will disappear naturally when the climate is dry, and it has no great influence on the movement.