How to clean the water dispenser tips
4hw.org: many people don't know that the water dispenser that we use everyday is actually the dirtiest place in our home. Because the water dispenser can't be cleaned because it's wet all the year round, and there will be a lot of bacteria and microorganisms in it, and even mildew and green spots, which pose a great threat to our health. So how to clean the water dispenser? Let's take a look at how to clean the water dispenser!
Tools for cleaning water dispenser:
① water dispenser cleaning brush
② special towel
Mask
Measuring cup
Pouch
⑥ plastic gloves (disposable gloves)
Sleeves
⑧ screwdriver (to prevent the drain from blocking, the back cover must be removed)
This article is provided by the editor of Sihai life channel. To learn about life tips, please pay attention to Sihai life channel to make your life easier!
Cleaning method of water dispenser:
1. Turn off the power supply of the water dispenser and remove the bucket (there is water in the water dispenser at this time); put the water dispenser in the cleaning work area, connect the power supply and turn on the heating switch.
2. Take down the smart seat, take 50g of food grade citric acid to fully dissolve it and pour it into the heating tank for repeated circulation, wash and soak the tank with food grade citric acid to decompose the scale residue of the heating tank, after soaking for 5-10 minutes, turn off the power of the water dispenser, and then drain the residual water into the water dispenser.
3. Use professional cleaning equipment, insert the water supply pipe into the water inlet under the smart seat, connect the return water with the water outlet of the water dispenser, open the water outlet, and form a closed high-pressure circulation channel.
4. Simultaneously open the water circulation system, ozone disinfection system and ultraviolet sterilization system to make the circulating water mixed with ozone and carry out ultraviolet irradiation sterilization on the circulating water return system.
5. The cold and hot bile should be operated independently according to step 3 and step 4 respectively, and the cleaning cycle should be disinfected for about 5-10 minutes.
6. Open the back or bottom drain of the water dispenser to drain the water in the body.
7. Use 150 & deg; high temperature and high pressure steam gun to clean and disinfect the water dispenser.
8. Return the water dispenser to its place and put the bucket on it.
This article is provided by the editor of Sihai life channel. To learn about life tips, please pay attention to Sihai life channel to make your life easier!