Sihai network

How to choose and buy solid wood wardrobe

How to choose and buy solid wood wardrobe

Purchasing skills of solid wood wardrobe

1. Is the structure firm

Small wardrobe in the selection can be dragged on the cement floor, gently fall a fall, the sound is clear and crisp, indicating good quality; if the voice is hoarse, there is a crackling noise, indicating that the tenon joint is not tight and the structure is not firm.

2. Is the binding smooth

If the edge is uneven, it means that the inner material is wet and the edge will fall off in a few days. Edge sealing should also be round corner, not straight edge and right angle. The edge sealed with wooden strips is easy to get damp or crack. For the wardrobe covered with plywood, nails are used to nail the strip. Pay attention to whether the nail hole is flat and whether the color of the nail hole is consistent with other parts. Usually, the nail hole is sealed with putty. Pay attention to whether the putty bulges. If the putty bulges up, it means that the putty will fall out slowly.

3. Is the seam of veneered wardrobe tight

Whether the veneer is pasted with wood veneer, PVC or pre painted paper, it is necessary to pay attention to whether the leather is pasted smoothly, whether there are bulges, blisters and loose seams. Only in sufficient light can the seam be checked clearly. Fraxinus veneer wardrobe is easy to be damaged, and can only be used for two years. In terms of wood veneer, planing veneer is better than rotary cutting veneer. The method to identify the two is to look at the pattern of wood. The veneer is straight and dense in texture, while the pattern of veneer is curved and sparse. Particleboard veneer wardrobe, the landing part must be edge sealed, not edge board will absorb moisture, swell and damage. In general, the corner of the wardrobe is easy to be tilted up. When selecting, you can pick the corner by hand. If you pick it up, it means there is a problem with glue.

4. The paint should be smooth

The paint part of solid wood wardrobe should be smooth and flat, without wrinkle and pimple. The corner part cannot be straight edge and right angle, and the straight edge is easy to collapse slag and paint. Inside the door of the wardrobe should also be painted with a layer of paint. If it is not painted, the board is easy to bend and not beautiful. Special tips: be sure to check whether the door lock switch works well; the cabinet should be equipped with 3 concealed hinges, some can not be installed with 2; 3 screws should be installed, some shoddy, and only one screw can be used.

5. Take a look in the mirror and the wardrobe

Choose a wardrobe with mirrors, such as dressing table, dressing mirror and dressing mirror. Take a look at the mirror to see if the mirror is deformed and discolored. Check whether there is lining paper and back board at the mercury position at the back of the mirror. If there is no back plate, it is not qualified. If there is no paper, the Mercury will be worn off.

Cleaning and maintenance of solid wood wardrobe

1. The heavy objects and sharp tools should be prevented from hitting the track and scratching the cabinet body and door panel. The sealing edge of the cabinet should not touch water and other liquid solvents, so as to avoid falling off of the sealing edge.

2. Keep the cabinet door clean and keep the track free of debris and dust. When cleaning, the cabinet body and door can be wiped with a semi wet cloth, and corrosive cleaning agent should not be used. Dust on the track can be cleaned by vacuum cleaner or small brush, and metal parts such as cabinet frame and pull rod are wiped with dry cloth.

3. Let it breathe more, or use dehumidifier regularly, so as to avoid the cabinet and clothes from getting damp and bacteria. Use less aromatics that contain chemical ingredients to deodorize the wardrobe, as they are likely to damage the material.

4. It is normal for the pulley of the light rail door to make noise after a long time of service. In order to ensure the pulley to be smooth and silent, please add some lubricating oil along the upper and lower pulleys regularly every 2-3 months.

5. Wooden wardrobe usually as long as clean cloth wipe can, if there is dirt, you can use soap water or neutral detergent, wipe with wet cloth.

6. When the room air or the weather is too humid, please open the doors and windows regularly for ventilation, and place small bags of dry lime or other desiccant in the corner of the wardrobe to prevent the cabinet and door panel from moldy and deformation.

7. Do not place the wardrobe in the direct sunlight, in order to avoid wood deformation or brittle under the light.