Sihai network

How to remove and clean the rolling screen

Four seas net: roller screen is a kind of screen that people use to prevent mosquito. In the summer and autumn nights, there are many and noisy mosquitoes. With such screens, these mosquitoes can stay out of the windows and sleep well all night. So how to remove and clean the rolling screen window?

Rolling screen is a kind of screen that can be pulled up and down. Its screen is not fixed, and it can move freely. Generally, such screen is easy to cause wind to enter, so it is good that rolling screen should reach level 6 or above. Rolling screen also needs to be disassembled and cleaned in the process of use, so users must understand how to disassemble rolling screen, And we need to know how to clean the screen correctly.

How to remove the rolling screen

1. In fact, the installation of rolling screen window is relatively simple. The first thing we need to pay attention to is the preparation of materials. In general, to install the roller screen, you need to prepare these things: a piece of silk screen, which is polyester mesh; two clips, which are used to fix the screen, so that the screen can be opened; four triangles, which are mainly used to fix the outer frame and PVC link; four groups of long strips, each group of which should contain the corresponding length, including the back glue magnetic strip, card slot magnetic strip and PVC plastic strip, etc.

2. To install the rolling screen window, pay attention to confirm the size of the window frame, which must be true, so that the installation can be smooth after cutting off the redundant PVC. Next, insert the PVC strip into the prepared triangle to make a frame.

3. Then lay the polyester mesh on the frame just finished, and press the mesh into the PVC strip with the magnetic strip with slot. Pay attention to pushing the gauze into the inner side of PVC strip according to the inclined direction of the grooved magnetic strip, and then pressing the outer side, so as to be stable. Then cut off the extra gauze outside the frame along the frame.

4. In the same way, the magnetic strip of back glue should be absorbed on the magnetic strip of card slot. Pay attention to install the second clip in the position about 30% from the top of the frame, so that it is basically OK. Then wipe the window frame clean, then tear off the back glue protective film, pay attention to press the back glue magnetic strip firmly to prevent falling off, and then install the rope on the triangle under the window frame at the left rear.

How to clean the screen correctly

1. Comprehensive nursing of batter.

You can go to the supermarket to buy some flour, mix the thick spots and turn them into batter, brush them on the screen window directly and wait for drying, then wash them away with tap water after they are completely dry, and the dirty things on the screen window can be washed away with the batter.

2. Cleaning method of screen window in special polluted area.

Generally speaking, it's hard to handle the kitchen screens. The method is to first remove the screen window, lay the newspaper on the ground, brush with steel wire ball, etc., and use detergent for everything. When most of the oil stains are removed, scrub with wet sponge. Then flush with water. Note that you can't use water at the beginning. Water can't melt oil, which will only make your home dirtier.

3. Dust is the treatment method of the main forehead screen window.

Transfer method. Still use old newspaper, soak newspaper first, stick on screen window wait for air to dry next, can transfer a few dust. This is what I do for this design. I put lotion on the newspaper. For example, if there is too much screen oil, I will put detergent on it. Then the oil will dissolve in the newspaper, and then the screen window of the newspaper will be opened and clean.

The above-mentioned explanation is how to disassemble the rolling screen window. When the correct disassembling method is not understood, the owner must not come around, otherwise it is easy to damage the screen. If the screen of the rolling screen window is really dirty, it should be cleaned in the correct way, so as to ensure the integrity and later use of the screen, Otherwise, the blind cleaning will only make the window screen less and less durable.