4hw.com.cn: as an alternative tool, automobile has been widely used in many families, and the tire is the most vulnerable part. If the tire is worn for a long time, its service life will be reduced. In order to extend the use of the tire, we should do a good job of protection.
Methods of reducing tire wear
How can we better reduce the tire wear? Do the following to reduce the tire wear:
1. Don't splash water for cooling
The tire tends to overheat when driving for a long time or at high speed in summer, and the air pressure increases at the same time. (www.zhichangshi. Com) at this time, it is required to stop cooling, and it is strictly prohibited to deflate and depressurize or splash water to cool down, so as to prevent abnormal aging of tread rubber.
2. Choose a good road
In the movie and TV series, we often see the vehicle galloping on the complicated road surface, no matter how the road condition is, it does not affect the speed at all, which is not desirable in real life. If you want to cherish your vehicle, you should choose a good road surface, do not compare the vehicle technology and courage, so as to prevent the impact of excessive tire wear on driving safety.
3. Parking and leveling
Avoid parking the vehicle on a road with thick, sharp or sharp stones. Vehicles should not be parked near or in contact with petroleum products, acids and other materials that affect rubber deterioration. The driver should not turn the steering wheel after parking, such operation will accelerate the tire wear.
4. Tire pressure to be up to standard
It is the most important to maintain a proper tire pressure. When the tire pressure is lower than the standard value, the wear of the shoulder of the tire increases sharply. When the tire pressure is higher than the standard value, the wear of the middle part of the tire tread increases due to the decrease of the ground area and the increase of the unit pressure of the tire. At the same time, the dynamic load on the wheel increases, and the tire is prone to burst. Therefore, the owner of the car is better to give the tire proper tire pressure according to the regulations of the car manufacturer. In daily use, the tire pressure gauge can be used for testing, and the tire pressure can be increased or decreased as appropriate.
5. Control the speed
Uniform speed is the best way to save fuel. If it is fast and slow, it will not only increase fuel consumption, but also increase tire wear. When the vehicle turns, it should slow down properly according to the road conditions and turning radius of the curve, so as to avoid the acceleration of unilateral tire wear due to the effect of inertia force and centrifugal force. Good speed control can not only reduce tire wear, but also contribute to driving safety.
6. Avoid hard braking
When driving on a crowded road, the most taboo is to walk and stop. Do not plug in the cracks. Meng start and emergency braking will not only increase fuel consumption, but also increase the wear degree of tires. You should master the appropriate speed and pay attention to the dynamic conditions of the road, pedestrians and vehicles, prepare for braking, reduce frequent braking, avoid emergency braking, so as to reduce tire wear; In the face of broken glass or other foreign matters that cannot be avoided, slow down to pass, and do not brake hard, because the pressure increases due to the brake hard, and the glass fragments and foreign matters are easier to get into the tire.
Conclusion: through the introduction of the above editor, I believe you have some understanding of how to better reduce tire wear. The car is an indispensable tool for us. In our daily life, we must take good care of it and avoid spending a lot of money to do maintenance and repair, which is not worth the loss.