Sihai network

How to apply for tractor driving license

4hw.com.cn: the most basic functions of tractors are transportation, promotion, cultivation, rotation, sowing, spraying, and cultivation. Tractors have good traction performance and are suitable for high-speed operation on large farms with wide range farm tools. They play a very important role on the opposite side of agriculture. Do you know that you need a driving license to open tractors? How to apply for a tractor driving license?

How to apply for tractor driver's license

When applying for the tractor driving license for the first time, an application shall be made to the agricultural machinery supervision organization of the registered or temporary residence, and the application form for tractor driving license shall be filled in, and the following certificates shall be submitted:

(1) The identity certificate of the applicant and its copy;

(2) A certificate of physical condition issued by a medical institution at or above the county level or the regimental level of the army.

Precautions for driving the tractor

1. Parking place

It is better to park it in the warehouse, but not with chemical fertilizer and pesticide, so as to avoid volatilization and corrosion of machine parts. If it is parked outdoors, the place with high ventilation shall be selected and covered with plastic cloth to prevent mechanical damage and corrosion.

2. Cushion body

The tractor is padded up with wooden piers or bricks to reduce the load of tires. If the body is not supported, the tire inflation shall be increased by 10% - 20%, and the tire shall be checked frequently, inflated frequently, without air shortage.

3. Thorough cleaning

Clean the mud and oil on the tractor surface, comprehensively check, adjust and firm all parts and screws to avoid loosening and falling off.

4. Drain oil and water

After the tractor is stopped, the cooling water, diesel oil and engine oil in the engine shall be completely drained.

5. Maintenance parts

Take a proper amount of dehydrated oil (heat the oil to about 130 ℃) and pour it into the intake pipe, rotate the crankshaft, so that the oil can adhere to the piston, piston rod, cylinder sleeve and valve. The piston shall be rocked to the top dead center of compression to prevent the valve spring, push rod and other parts from being compressed for a long time and losing their performance.