4hw.com.cn: we need to use lampblack machine frequently in our life. It can be said that it is a necessary good helper in the kitchen. But often use will inevitably have the stain oil stain. How to clean the kitchen range hood? The lampblack machine is easy to deposit oil dirt, and the cleaning is relatively difficult. Here are some good ways to teach you.
Cleaning method of kitchen range hood
Introduction to disassembly and cleaning method
1. Soap to remove grease
Add water to make the soap into paste, and then smear it on the surface of the fan blade and other parts. After using the range hood for a period of time, remove the fan blade and other parts, and wipe it with a wet rag, and the oil stain will fall off.
2. Degrease by soaking detergent and vinegar
Remove the fan leaves of the range hood, soak them in a basin of warm water mixed with 3-5 drops of detergent and 50 ml of vinegar, soak them for 10-20 minutes, and then scrub them with a clean cloth. The shell and other parts can also be cleaned with this solution. This method has no damage to human skin and no corrosion to devices.
Introduction of cleaning method without disassembly
1. Oil removal by steam washing of high pressure boiler
Boil the cold water in the high-pressure boiler, take the lower pressure valve when there is steam continuously discharged, open the range hood, and align the steam water column with the rotating fan blade. As the high hot water vapor continuously rushes into the fan blades and other parts, the oil sewage will gradually flow into the oil storage tank until there is no oil in the oil tank.
2. Self made detergent
Specific steps:
(1) Take a plastic bottle (all kinds of beverage bottles that can be pinched flat by hand), poke more than 10 holes in the cover with a sewing needle, and then put in a proper amount of detergent, then fill it with warm water and shake it evenly.
(2) Start the range hood, spray the cleaning liquid towards the parts to be washed with the plastic bottle full of detergent. At this time, it can be seen that the oil stain and dirty water flow into the oil storage hopper together, and pour them when they are full.
(3) After the detergent in the bottle is used up, continue to prepare and clean again. Until the dirty water flowing out becomes clear, depending on the scale degree, it can be washed clean after 3 times.
(4) If a net cover is installed outside the fan blade, the net cover should be taken down first to enhance the washing effect.
(5) Wipe the area around the suction port, the shell surface and the lampshade with a rag.
How to prevent the oil stain of kitchen lampblack machine from cleaning
1. Before starting the new range hood, sprinkle a thin layer of soap powder in two oil tanks, and then inject about one third of the water, so that the recovered oil will float on the water surface, rather than coagulate on the wall of the box. When the waste oil is full, pour it out, and then process it as usual.
2. Before use, we can use a slightly wet dishcloth to dip in the dishwasher detergent (do not mix water -) to wipe the body, and wipe the fan blades as much as possible. After natural drying, the 'detergent coating' to prevent the oil smoke from adhering is ready. After a while, if the fuselage feels sticky, it's time to clean it. Since the "protective coating" has been applied between the oil stain and the fuselage, the oil stain will be washed down first when the fuselage is washed directly with 80 ℃ hot water. Of course, don't forget to apply the detergent coating after cleaning.
3. Take advantage of the residual heat on the range hood, wipe the surface slightly with a rag, then you can easily wipe off the oil stains on the range hood, and keep it clean and not greasy.