Sihai network

What to do if the door of washing machine can't be opened

4hw.com.cn: what is the fault of Haier's E2 washing machine? Some faults of the washing machine will be prompted to you in the form of code. Let's learn about the common problems of the washing machine.

What is the fault of Haier washing machine E2

Haier washing machine display E2 indicates that the upper cover of the washing machine is not covered. Please close the upper cover of the washing machine, and do not open the washing machine casually during automatic washing. If you need to stop, you need to press the 'pause' button first, and then open the washing machine after the washing machine stops completely.

What to do if the door of washing machine can't be opened

1. Electromagnetic door lock series

1.1. Check whether the washing machine is in the suspended state, that is to say, the start / pause indicator light is in the flashing state to indicate that it is in the suspended state.

1.2. If the water level in the washing machine is too high, the water level should be lower than the lower edge of the observation window for a certain distance. If the water level is too high, the drain pipe can be laid on the ground to discharge the excess water from the washing machine.

1.3. Whether the temperature in the barrel is lower than 50 ℃. If the drying or heating function is selected, the door can be opened only when the temperature in the washing machine is lower than 50 ℃. Only when the above conditions are met, press and hold the start / pause key for 2 seconds, the door can be opened.

1.4 if emergency door opening is required, open the filter trim panel. There is an emergency pull rope on one side of the filter. Pull the pull rope vertically to open the door.

Note: the emergency pull rope is only available for the electromagnetic door lock. The door can be opened under any circumstances with this pull rope, so do not pull it casually in case of emergency.

2. Micro delay door lock series

2.1. Check whether the machine is in the suspended state. It cannot be opened when it is not in the suspended state.

2.2 is the water level in the barrel lower than the lower edge of the observation window for a certain distance? If the water level is not lower than the water level, the door cannot be opened.

2.3. The machine must be shut down for 2-3 minutes before it can be opened. If all of the above items meet the requirements, you can directly press and hold the door handle to open the door. If you still can't open the door, you can guide the user to knock the position around the door lock to open the door.

What is the E2 fault of Haier washing machine? Some faults of the washing machine will be prompted to you in the form of code. Let's learn about the common problems of the washing machine.

How to deal with noisy washing machine

1. Is it because there are too many clothes to wash? You can try to reduce some clothes.

2. It may also be caused by the friction between the zipper or button of the clothing and the inner cylinder. It is recommended that the user work on the empty machine to see if there is any sound.

3. Check whether there is the friction sound (whistle sound) between the motor carbon brush and the motor. This is a normal sound. You don't need to worry about it when you use it.

4. Check whether the sound is the wheezing sound during drainage. If it is the normal working sound room of the drainage pump, please feel free to use it.

5. If none of the above can solve the problem, you need to find after-sales maintenance personnel to repair it and see what the cause of the failure is.