Sihaiwang: with the rain in these days, the kitchen and toilet in the house are easy to cause the phenomenon of tide return. Especially in the kitchen, safety and health are very important. How to deal with the tide in the kitchen? May as well have a look with Xiaobian!
How to deal with moldy kitchen walls
What to do with moldy kitchen walls
Generally, the moldy kitchen walls are caused by too humid indoor or long-term immersion in water, so that the walls are prone to spotty mold, or large areas of moldy, and some walls even grow moss.
Suggestion: if the kitchen wall is moldy, first use a scraper to hang off the moldy wall skin. The area scraped off should be one circle larger than the moldy area. Then use good ventilation and air drying to make sure it is not wet before later repair. Clean the wall that has been scraped off the wall surface, apply the prepared putty powder, and plaster lime after the putty is dry. The lime can absorb water and keep dry. Finally, apply waterproof paint and emulsion paint, and then polish the wall surface once.
What to do with the bubbles on the kitchen wall
Sometimes the walls of the kitchen will appear blister like protrusions, which will drop when touched. This may be caused by adding too much pigment or mixing sundries in the paint preparation; unclean paint barrel, brush and roller; when the paint surface is not dry, water infiltrates into the paint, resulting in the paint film is non adhesion; when painting the wall surface, the wall surface is not cleaned in time.
Suggestion: when there are bubbles in the kitchen wall, first you should remove all the bubbles and peeling parts, but it is caused by the putty on the wall base, so you need to remove the putty, and then select the appropriate putty to do it again. Local wall blistering can only be partially scraped off, and then the edge of the scraped off part shall be ground smooth, primed, and finally reapplied.
How to deal with the peeling of the kitchen wall
Sometimes the kitchen wall will appear the phenomenon of lump putty floating and falling, the main reason is poor construction technology, putty, coating adhesion and shrinkage performance, etc.
Suggestion: to solve the problem of peeling off the kitchen wall, the base layer of the wall needs to be reinforced. After the peeling off of the wall, the sundries on the wall should be completely removed, and the putty and paint should be applied again.
It should be noted that there are differences in the paint applicable to the interior and exterior walls. The interior wall latex paint has high requirements for I scrub resistance. It is easy to stain the walls in the home life, and can be wiped with water at any time. The reason why the exterior wall paint can be applied to the interior wall is that it has water resistance. The interior wall paint has no sun resistance function and cannot be applied to the exterior wall.
How to deal with the crack of the kitchen wall
Some kitchen walls will crack before peeling. Spider like cracks will appear on the wall until they are connected into one piece, causing the wall to fall off. Another reason is that the putty shrinks. In the construction, if the putty in front is not completely dried, the putty will be scraped once, and the paint will be applied if the putty in the second time is not completely dried, which will cause the surface layer to crack after the putty is dried.
Suggestion: the way to remedy the wall crack is to put the putty and paint on the crack, but it can't be completely eliminated. In order to prevent this kind of problem, the putty for the first time in the construction shall be fully dried and then scraped again. The thickness of putty for each time shall not exceed 2mm. During rework and repair, the cracks shall be scraped clean, and the putty shall be used to make up the cracks. After the putty is dry, the top coat shall be painted once.
How to deal with the tide in the kitchen
&_; &_; &_; &_; &
It's faster to mop the ground with salt water. In the weather of "back tide", we just need to mop the ground with hot water, and put some salt in it. First of all, let's heat the water until it turns into a temperature that won't burn your hands. The water temperature is about 40 ℃. Then we add a spoonful of salt to the water and stir it a little. When the salt is fully dissolved, we can start to mop the floor. Soak the mop in hot brine, wring it out as much as possible, and mop the floor clean. This is because the volatilization speed of the liquid is related to the temperature. The higher the temperature is, the faster the volatilization speed will be, and the floor will naturally dry faster with warm water.
Kitchen wall is back to damp
In winter, when the kitchen wall is damp, you can apply a layer of gypsum board or a layer of waterproof paint to achieve moisture-proof effect. Basically no problem. If the wall is always damp, it is recommended to shovel off the wall and make it waterproof again. Note that the new waterproof layer and the old waterproof layer shall be well linked, and the construction shall be carried out according to the instructions of the regular manufacturer, and the closed water test shall be carried out after the construction. Although the closed water experiment is troublesome, it is necessary to do it.
Kitchen food return
Try to put kelp and mildew inhibiting food in the refrigerator. Sausages, ham and other meat pickled food can be dipped with a little vegetable oil with a cotton swab, evenly applied on the surface, and then hung in a well ventilated place to prevent mildew; mushrooms should be stored in a sealed container, if the surface is slightly mildewed, the mildewed flowers can be brushed and baked, not washed. Put a little kelp in the rice to kill pests and inhibit mold.
How to dehumidify the kitchen
washing powder
It's easy to use washing powder for dehumidification. Just pour the washing powder directly into the soap box. Remember to store it in the opposite direction, or the washing powder will spill out. Put the box in the corner of the kitchen. When the washing powder agglomerates, there are still people who can wash clothes.
Quick lime
We all know that quicklime has the function of drying. Can we dehumidify it? A kilogram of quicklime can absorb 0.3KG of water. You can put the quicklime in the cloth bag, and then put it in the damp place of the kitchen, and it will play the role of quicklime.
Indoor heating up
Burn a basin of charcoal in the kitchen, put it on the stove, pay attention to ventilation, to improve the temperature of the room, so that the water vapor can not condense quickly, to achieve the effect of dehumidification.
improve air circulation
Ventilation is the most simple and convenient, the effect is also very good, the kitchen window can generally be suspended to open the window, in case of rainy weather, it can be suspended to open the window, so that the indoor moisture can be effectively removed. When the weather is clear, open all the doors and windows again to let the water vapor evaporate slowly.