Sihaiwang: the electric fan has been placed for a year. When it is taken out for use in summer, it must be covered with a thick layer of dust. The electric fan will deposit dust on its leaves and outer frame when it is used for a long time. Is there any simple and convenient way to clean the electric fan? Follow Xiaobian to have a look.
How to clean the dust of electric fan
How to clean the dust of electric fan
After the dust is deposited, the wind blown out by the electric fan will have an unpleasant smell. In addition, the service life of the electric fan may be shortened, so it is necessary to regularly complex the dust of the electric fan. Let's look at the specific cleaning methods:
1. For general floor fans and table fans, it is more convenient to disassemble. Some of them are buckle, and some of them only need to screw out a few screws. For the oil and smoke stains deposited in the gaps of the electric fan frame, special cleaning agent can be used to clean them, which can be easily removed. For the fan blade part, wipe the dust with a rag, taking care not to let water penetrate into the machine.
2. When cleaning, it is not only to clean the blades and frames, but also to maintain the electric fan motor, which is the core component of the electric fan. It is mainly to check whether the bearing and gear of the motor need lubricating oil. Commonly used sewing oil or common gear oil, a few drops can play the role of lubrication and maintenance.
3. When cleaning the electric fan, remember to cut off the power supply and dry it after cleaning.
Maintenance method after cleaning
A quick method to remove rust spots
The fan has been used for a long time, and there will be many rust spots on the metal protective cover, which is difficult to remove. However, if you dip some washing powder and water on the cover with a rag, and then dip some talcum powder to wipe the rust spots, the rust spots will be wiped off soon.
Self made detergent
Because the fan with a long time will inevitably have dirt, become greasy, only washing is difficult to clean. You can make a small box of detergent by yourself, add a cover of washing powder, two covers of vinegar and three covers of alcohol in 50ml water. Can also add a little clothing softener, it can clean the leaves, remove static electricity, prevent dust. Then pour it into the bottle, cover it and shake it well. If there is a lot of oil, you can also use oil detergent.
How to refuel the electric fan
After the fan leaves are removed, there is adhesive in the center of the fan. Remove the retaining ring and tear the adhesive carefully. This center is the fan shaft. The problem is that the fan doesn't work a lot. Drop the machine oil here, and it's OK. If there is a new adhesive, it can be resealed. If you use the old one, you should clean the adhesive surface, and then stick the adhesive back. After all parts of the fan are dried, the installation and removal steps shall be reinstalled, and the screws shall be tightened carefully. Power on and try to rotate normally.