4hw.com.cn: summer is coming, and the season of air conditioning is hot. Many people say that Panasonic air conditioner they bought doesn't understand the buttons on the air conditioner very well, and they don't know how to operate it. Here's the manual of Panasonic remote control for your reference.
Panasonic remote control manual
Timing function
1. Press and hold the 'timing' button with your finger. In the digital display area, symbols such as' clock 'will flash once a second. When the time number stops flashing, you can start to adjust the timing time.
2. At this time, if you press a time button, the time will increase every hour. If you press the minute button, press it to increase 10 minutes.
3. After setting the timing time, use a round bar with a diameter of 1mm, press and hold the time button, then the 'clock' symbol will stop flashing, and the setting is completed.
Switch button
"On / off" key: when the air conditioner is turned off, pressing this key will automatically enter into the running state. After turning on, pressing it will automatically turn off the air conditioner for standby.
Choice mode
'mode' key: after the air conditioner is turned on, press the mode key, it will change the mode, and its mode will cycle in the modes of 'auto cooling dehumidification air supply heating auto'. Press once to change one mode.
Wind speed selection
'wind speed' key: after pressing this key, the air conditioner will blow air from the air outlet. The wind speed of the indoor unit has several kinds of wind speeds, such as' auto - low wind - stroke - high wind - Auto ', which can be selected according to your own needs.
Wind direction setting
'wind direction' key: the wind direction key can select the wind direction, and its air vane mainly circulates in 'auto position [1] - position [2] - position [3] - position [4] - position [5] - Auto'.
"Swing wind" key: press the swing wind key, and its swing wind setting will be divided into two modes: continuous swing and inching.
I believe that many people bought Panasonic air conditioner and found that the keys on the air conditioner can't read very well and how to operate it. The following gives you the instructions of Panasonic remote control for reference only.
Causes of remote control failure of Panasonic air conditioner
1. Remote control does not have power
The most likely reason for the failure of the air conditioner remote control is that the remote control is out of power. Many people may have encountered such a situation in their homes. Just replace the battery.
2. Poor contact
Of course, it may also be the poor contact of the battery on the remote control or the corrosion of the battery fins that causes the remote control buttons to fail.
3. Remote control damaged
Maybe the LED on the remote control is damaged, or the internal button fails after the remote control has been used for a long time, and the parts are aging, which causes the remote control to be broken.
4. Air conditioning partially damaged
If it is not the problem of the remote control, it must be the damage of the receiving signal components in the air conditioner, which is easy to be misunderstood as the failure of the air conditioner remote control. It is also possible that there is a problem with the circuit board of the air conditioner.