Sihai network

How to modulate the heating mode of Kelon air conditioner

4hw.com.cn: many Kelong air conditioning users said that they would not call out the heating mode in winter. Today, I'll teach you how to turn on the heating mode. If you don't, you can have a look.

How to adjust the heating of Kelon air conditioner

1. Connect the power supply of Kelon air conditioner, and turn on the air conditioner with the switch button on the motor remote control.

2. Find the 'mode' button on the remote control, and then press the mode button. At this time, you can switch to other modes, and press again to switch to other modes. There are refrigeration, heating, dehumidification and automatic modes. When the remote control icon shows a sun, it means that the air conditioner has turned on heating mode.

3. Adjust the temperature '+' - 'button to adjust the temperature, and set it at the appropriate temperature, generally between 26-28 ℃.

4. Wait for the air conditioner to work. Generally, the preparation time of the air conditioner is relatively long in heating mode. It needs to wait for 10-20 minutes patiently. It usually takes a while to get out.

Causes of poor heating effect of Kelong air conditioner

1. Low outdoor temperature or poor electrical environment

If the outdoor temperature is too low, the air conditioner will not work normally. If the temperature is too low, the outdoor unit of the air conditioner will not defrost. In this way, the surface of the outdoor unit is covered with a thick layer of frost, which will affect the heating. In addition, the low voltage may directly affect the cooling and heating effect of air conditioning.

2. The heating power of air conditioner is too small

Sometimes the selected air conditioning power is too small, and the room area is relatively large, and the insulation is not good, the heat produced by the air conditioning can not meet the needs of the room, so the heating effect will become poor.

3. No electric auxiliary heat function

After market investigation, many air-conditioners without electric auxiliary heat have poor heating effect, which is very common in old air-conditioners.

4. Too much dust on air conditioning filter

There is too much dust in the air filter of the air conditioner, and the vent of the internal and external units is blocked by foreign matters. The function of the filter screen is to absorb the dust in the air. If too much dust is accumulated and not cleaned in time, the air circulation will be blocked, resulting in the reduction of the air volume at the air outlet, resulting in the failure of the heat produced in the machine to be brought out in time by the flowing air, resulting in the lack of heat produced.

In winter, users will not modulate the heating mode when using Kelon air conditioner for heating. Here's how to turn on the heating mode. If not, you can have a look.

No reaction when the air conditioner is turned on for heating

1. No heating at start-up

Air conditioners are equipped with anti cold air systems, so when they are turned on, they will not blow out hot air immediately. Generally, they need to wait for a few minutes before they can produce hot air. Only when the temperature of the air conditioner pipe reaches a certain temperature, it will start to supply air. This is to avoid the impact of cold air on the heating experience during heating. It is recommended to wait for 10 to 20 minutes after turning on the air conditioner to observe whether the air conditioner reacts.

2. Air conditioning defrosting

If the air conditioner suddenly fails to make heat in the heating process, it may be defrosting. Generally, the air conditioner will defrost once every 40 minutes to an hour. The defrosting time and space can not be adjusted to make heat. Generally, the air conditioner will not continue to work until 10 minutes later. If it still does not work after 10 minutes, it may be an air conditioner failure.

3. The air conditioner reaches the set temperature

When the indoor temperature reaches the set value, it will not continue to work. This is a normal phenomenon. When the temperature drops, it will start again. If it does not start, it is the problem of air conditioning.

4. Air conditioning heating system failure

If none of the above is true, there is a problem with the heating system of the air conditioner. It is necessary to check the heating system one by one to see which link has a problem.