Sihai network

How to clean the cement spots on the tiles? What are the precautions for removing the cement from th

How to clean the cement spots on the tiles? What are the precautions for removing the cement from the tiles

4hw.com.cn: after the house is decorated, it doesn't mean the success. There are many small problems that need technical treatment. The cement on the ceramic tile is a big problem, because the longer it takes, the harder it is to clean it. Let's look at the cleaning methods together.

How to remove the cement from the tiles

The longer the cement on the ceramic tile adheres, the more humidity, the more difficult it is to remove completely. The following methods can be tried:

Hydrochloric acid mixed solution removal

Mix hydrochloric acid or phosphoric acid solution with water in the proportion of 1:5 (if the cement is thick, drop some hydrochloric acid or phosphoric acid solution directly on it first). Pour the prepared solution on it, sprinkle the saw foam, and clean it with a wooden shovel (do not use the metal one to leave traces, not to use the wire ball of the brush pot). When shoveling, you can also wet the cement slurry with a cloth. Pay attention to cleaning along with the shovel. Generally, it can be removed by wiping it several times.

Toilet fluid removal

The cement on the ceramic tile can be washed away with toilet cleaner. Even the cheapest one, the effect is very good. If it is poured, it will be wiped off without damaging the brick surface.

Professional cleaning agent

For example, a thin layer of concrete cleaner. It is used to clean the lime, lime residue and cement thin layer on the ceramic tiles (glazed tiles, all-round tiles, vitrified tiles, and polished tiles), clear water bricks, ceramic products and natural stones.

Toothpaste to remove small stains

If there is a small amount of cement stains in the tiles and cracks, it is recommended to use toothpaste to clean them, which has a strong cleaning effect. First, squeeze a proper amount of toothpaste on the brush, determine the use amount of toothpaste according to the size of the stain at the joint, and then directly brush the joint of the ceramic tile. When brushing the gap of the ceramic tile, brush along the direction of the joint of the ceramic tile, so as to clean the stain.

All kinds of plastic cards

The cement imprint on the tile can also be used to contact various membership cards. Don't underestimate this card. It plays a wonderful role in dealing with the cement imprint on the tile. Scraping the card against the place with the cement imprint can not only scrape clean but also quickly, but also rotate 360 degrees, and there will be no profit mark on the tile surface. Finally, use the duster to lighten it It's done with a light wipe.

Precautions for removing tile cement

1. Avoid using metal shovel, steel ball and other metal objects to remove cement, so as to avoid damaging the glaze and leaving ugly traces.

2. When using acid cleaner, it is necessary to pay attention to the mixing proportion to avoid pouring directly on the stained surface of ceramic tile, so as to avoid damaging the glaze.

How to deal with the leakage of water pipe under the floor tile

The water pipe under the floor tile leaks, which may be caused by its own aging, loose parts and components, or improper installation. When the water pipe is found leaking, the normal operation steps are as follows:

1. Find the main leak first. First dry the floor and observe the position of the water.

2. Then cut off the floor tiles around the water outlet. If the water outlet is found, turn off the main tap water switch, turn on the low tap and drain the water in the water pipe. Pull out the water pipe in front of the leaking section of water pipe, blow smoke into the water pipe, see where the smoke comes out, and mark the position.

Connect the water pipe pulled out in front, pull out the water pipe from the back of the leaking section, repeat the original smoke blowing practice, see where the smoke comes out, record the smoke location, according to the smoke location recorded twice, you can know which water pipe leaks.

3. If no water outlet is found, all floor tiles in the direction of water pipe can only be removed, and the second step can be continued after the water outlet is found. After the water pipe is repaired, the corresponding floor tiles shall be pasted again. Or rearrange the water pipe, and then discard the leaking pipe.

4. It is recommended to find professional personnel for operation to avoid unnecessary loss.