Sihai network

Cleaning wallpaper technology cleaning and maintenance methods of 5 types of wallpaper with differen

Wallpaper is pasted on the wall at home. It looks good and is not easy to wash. If it is accidentally dirty or has accumulated ash for a long time, how to clean it without damaging it? Wallpaper cleaning methods of different materials are different, which are described in detail below:

1、 Wallpaper cleaning

1. VC plastic wallpaper cleaning

VC plastic wallpaper is layered and made of polyvinyl chloride resin. When it is hot or cold, the edges and corners are easy to curl up, and there are many stains at the curled edges. At this time, you can wipe the edges and corners with a wet cloth, then dry them with a dry cloth, and apply glue on them to stick them firmly.

2. Natural wallpaper cleaning

Wood and grass are made of natural materials. The wallpaper made of these materials is simple, natural, elegant and generous. Sticking it on the wall can make the home full of vitality. If it is dirty, it can be cleaned with detergent. First spray the detergent on the stain, and then wipe it with a white cloth.

3. Wood fiber wallpaper cleaning

Wood fiber wallpaper does not contain any chemical substances. It is green, environmentally friendly and has good air permeability. After long use, it is inevitable that there are stains on the surface. At this time, it can be gently scrubbed with water, and then the stains can be cleaned with a small brush.

4. Non woven wallpaper cleaning

The surface layer of non-woven wallpaper is waterproof and easy to clean. In case of yellowing, mildew and stains, it can be directly wiped with a rag or brushed with a small brush. There is no need to worry about wetting or damaging the wallpaper during cleaning.

5. Pure paper wallpaper cleaning

Pure paper wallpaper has good air permeability, but absorbs water. If there is a stain on the surface, it cannot be directly wiped with water. It should be wiped with a dry cloth, and then wipe the stain with an eraser.

2、 Wallpaper maintenance

1. Maintenance before paving

Before laying wallpaper, the indoor temperature and humidity should be considered. Because the temperature is too high and the room is dry, the wallpaper is easy to wrinkle, while the temperature is too low and the room is wet, and the wallpaper is easy to be damaged. Therefore, it is recommended to lay the wallpaper under the indoor air humidity of 85% and the temperature of 28 ° C, so that the wallpaper can be flat and beautiful, It's also convenient for later maintenance. After paving, it is recommended to apply polyester paint on the surface of wallpaper to prevent moisture.

2. Maintenance after paving

After the wallpaper is paved, open the window for ventilation during the day to keep the indoor temperature and humidity within a certain range, and close the window at night to prevent moisture from entering the room and causing the wallpaper to mildew. In addition, do not open windows in rainy days or in strong winds to avoid damp wallpaper or wind damage. If you find stains on the wallpaper, wipe it with water in time, and dry it with a dry towel after scrubbing. For water-resistant wallpaper, wipe the stains on the surface directly with an eraser, and then dry it with a white towel.