If you want to gently handle the bathtub, you need some skills. Some stains can't be cleaned. How should you clean and maintain them?
Bath cleaning tips:
Tip 1: inject warm water into the bathtub to 2 inches above the highest nozzle, or leave the water in the bathtub after use. Add two teaspoons of low foam in water: powdered automatic dish detergent and a small amount of household bleach. Open the Jacuzzi for 5 to 10 minutes, then close it, drain the water, and then rinse the surface of the Jacuzzi with water. When the bathtub is hot and humid for a long time, many bacteria will breed. Sometimes after cleaning, the surface looks clean, but in fact, there are still many bacteria. China Cleaning network recommends that you regularly wipe the surface of the bathtub with boiling water and do not use disinfectant casually, because disinfectant may not kill molds and fungi.
Skill 2: repair the scars in time. Don't move the bathtub without permission. If you need to move the position, you must contact professionals. Do not hit or hit the surface with hard objects to cause bruises or scratches. If you need to repair the dull or scratched part of acrylic bathtub, you can wipe it with a clean rag mixed with colorless automatic polishing solution, and then apply a layer of colorless protective wax. Do not wax the landing area to prevent slipping.
Tip 3: gently treat the surface stains. You can brush the surface with an abandoned soft toothbrush dipped in bleach, which can not only remove the stains, but also eliminate the mold. When you encounter a stain that is difficult to wipe, you can also wipe it with half a lemon dipped in salt, or wipe it with a soft toothbrush coated with toothpaste with whitening function. Turpentine is also very easy to use at this time. For scale, the products used to clean the toilet on weekdays are very easy to use. If you don't like the pungent taste, you can also use the more natural method of lemon and white vinegar. Do not use detergents with fading function, especially when the bathtub at home is colored. To deal with molds and bacteria causing fungal diseases, wash them with bleach water and peroxide water and dry them immediately.
Skill 4: deal with the blockage of the pipeline at any time and disinfect it on time. The pipeline should be cleaned once or twice a week to remove the smell and prevent the breeding of bacteria You can use the product specially used to clean the sewer, pour it into the sewer and clean it after 5 minutes. Be careful not to use it in metal pipes. If the bathtub is blocked, close the water valve first, and then put an appropriate amount of tap water in the bathtub; Place the rubber suction device (for dredging the toilet) on the water removal valve; While opening the water valve, block the overflow hole of the basin or bathtub; Then quickly attract up and down, suck out the dirt or hair, and clean it up in time. In case of serious blockage, it can be repeated several times until it is dredged.
Precautions for cleaning:
Avoid using dark detergent, which is easy to cause pigment to penetrate into the cylinder surface. Tighten the water tap to avoid frequent dripping and ponding in the bathtub. Don't leave metal objects in the bathtub, otherwise the surface of the bathtub will rust and dirty.