Sihai network

How long hasn't your shower been cleaned? What should I do after the jam?

If the shower is used for a long time, it will be blocked. The most intuitive feeling is that the water is small and the washing is not comfortable enough. How to clean it?

Shower nozzle blockage Cleaning Tips

Use lubricant: if the metal of the sprinkler head is rusted and causes serious blockage, use WD-40 rust removal and antirust lubricant. This rust removal lubricant can have very good affinity and permeability with metals. The rusty layer can be separated from the metal layer. Make the rusty part contact with the metal and leave a protective film. Let the shower never rust. This method may be used if your shower is not made of stainless steel.

Dip with vinegar: if your shower head has been blocked for a long time, and a large number of holes have been blocked. So it's obviously not obvious to pierce one by one with a needle. In this case, it is recommended that you solve the problem of shower blockage by acidification and dust removal. You need to prepare some white vinegar. Pour the vinegar into the basin so that the shower head can be submerged. After soaking in vinegar for about ten minutes, the scale in the shower head can be removed.

Use acupuncture: if part of the small holes in your shower are blocked, drain the water first to see which holes are blocked. Then you have to turn on the shower head of the shower and see that there are many small holes on the shower head like the shower head. This is where the water comes out. Then we will first prepare a needle, and then use the needle to pierce the impurities in the perforation until there are no impurities in the hole. This method is the most direct, but be careful to prick the shower hole.

What if the shower head is blocked

It's natural that the shower head will be blocked after being used for a long time. This doesn't mean that the shower head is broken. Don't worry. You don't have to buy a new one at all. If there is scale after long-term drainage, you only need to disassemble and clean the shower head.

Many people may find it troublesome to hear the disassembly and cleaning. In fact, the operation is very simple. It doesn't require you to completely disassemble the shower head into pieces. The most important thing is to let you clean the shower head.

The main raw material for cleaning the shower head is white vinegar, which is also a kind of material long-standing in the family. After we remove the shower head, put it into a small basin containing white vinegar and soak it for about two hours. After soaking, brush it with a toothbrush and then clean it with clean water; If there is hard water sediment, scrub it with lemon slices.

When cleaning the shower head, pay special attention not to use strong acid (preferably white vinegar) to avoid corrosion on the shower surface. In order to ensure that the shower head is not blocked, we'd better clean the shower head every six months or less, so that you don't worry about the sudden blockage of the shower head when bathing, which will affect your mood.

In order to ensure the service life of the shower head, it is best not to install it directly below the Yuba, and it is best to be more than 60cm away from the Yuba, and often wipe the surface of the shower head with a little flour with a soft cloth to keep it as new as before.