Transparent tape is very convenient, but it is not easy to remove traces. Here are some tips to help you skillfully offset printing.
1、 Removal method of double-sided adhesive tape
1. Don't tear off that layer of paper first, blow the heat with a hair dryer, and then you can take it down as soon as you take it.
2. If you have left black marks, you can apply some of the white flower oil at home, wipe it off with a rag and wash it with clean water. If there is no white flower oil at home, you can wipe it repeatedly with something such as balm or falling oil.
3. If the black mark is not big, you can wipe it with an eraser. If the area is large, you can apply anhydrous alcohol, that is, industrial alcohol, on the pasted position, and then wipe it with a cloth.
4. Use a dry cloth covered with vinegar to cover the whole trace. After the double-sided tape is completely wet, you can gently scrape it off with a ruler.
2、 Removal method of transparent glue trace
1. The eraser is also very effective in removing the traces of transparent glue, but it is only suitable for a small range of traces.
2. Use a wet towel. This method may be the one we thought of when we first found traces of transparent glue. We can wet the offset with a wet towel, and then wipe it slowly, but this method is only limited to the places that are not afraid of being sticky and wet.
3. Wipe with alcohol. Firstly, when using this method, the place to be wiped must be determined in advance, not afraid of color fading. Stick alcohol with a cloth and wipe slowly until it is wiped off.
4. Detergent also has the effect of removing the traces of transparent glue. The use steps are the same as other methods.
5. Because there are chemical components in ordinary nail washing water, the effect of removing the traces of transparent glue is also very good.
3、 Removal method of double-sided adhesive tape on Wall
1, first use the nail polish paint to remove the water. Because the light removing water can make the original color of the wall fall off. This method is recommended to be used in small places that are not obvious. It is not recommended to use it if it is a large area and conspicuous wall.
2. The heating method is to soften the double-sided adhesive tape, blow it with a hair dryer, and wait until the double-sided adhesive tape becomes soft, you can easily remove the traces.
3. We can take a dry cloth covered with vinegar to cover the whole double-sided tape trace. After the double-sided tape is completely wet, we can easily remove it with a ruler.
Four, foam double-sided adhesive removal methods
1. If you stick it on the wall, you can scrape a small corner with a sharp thing, and then press the small corner with your hand to tear it down. This method is tired, but it won't leave a trace.
2, if you put it on plastic, dip the towel in the hot water, soak the foam double-sided glue, and then find the small corner slowly scrape off.
3. If you stick it on the glass, you can try to use decontamination powder. Take some detergent and put it on a semi wet rag and wipe it back and forth several times. If it is a hard mark, you can wet the mark first and then use decontamination powder.
4. First soak the rag with warm water, and then wipe the trace position. While wiping, generally spray detergent. After a while, the offset will become soft and easy to remove.