Tips on how to clean the shower head when the shower head is blocked at home
4hw.com.cn: I believe many friends have encountered this situation. The shower in the shower at home takes a long time, and many holes will be blocked slowly, and even the water can't come out. So how to clean the shower head quickly? Xiaobian will teach you some tips for cleaning the shower quickly!
1、 Treatment of blocked shower
1. Use acupuncture
If only part of the small holes of the shower are blocked, drain the water first, and then prick the impurities in the perforation with a needle!
2. Soak with vinegar
If a large number of holes in the shower are blocked, it is not appropriate to prick one by one with a needle. It is suggested that you prepare some white vinegar, pour the vinegar into the basin, and it is appropriate that the shower head can be immersed. Soak it for ten minutes, and then open the water, you can flush out the scale and impurities, and the shower will pass.
3. Use rust remover
If the metal of the sprinkler head is rusted and blocked, WD-40 rust remover is recommended. It has good permeability and can remove rust. After the shower is connected, put more water for flushing. WD-40 is not good for people.
4. Wipe with towel
At ordinary times, we should develop the good habit of maintaining the shower shower. After taking a bath every time, we should shake the shower, and then wipe the water outlet of the shower with a towel. For the outlet hole of rubber material, you can rub it with your fingers.
5. Precautions for shower cleaning
a. Do not use strong acid to remove scale, so as not to cause corrosion to the surface of the shower.
b. Do not wipe the shower surface with hard objects such as steel ball to avoid scratching the faucet surface.
c. Do not forcibly disassemble the shower for maintenance. Improper disassembly will damage the appearance and internal structure of the product.
2、 How to buy Shower?
1. A well-designed sprinkler can ensure that the water distributed by each nozzle is basically the same, so the selection of sprinkler must depend on the water. Water saving function is the key point to be considered when purchasing sprinkler. Some sprinklers adopt steel ball valve core and equipped with regulating hot water controller, which can adjust the inflow of hot water into the mixing tank, so that the hot water can flow out quickly and accurately. This kind of sprinkler with reasonable design saves 50% water than ordinary sprinkler.
2. When selecting, let the shower tilt the water. If the water from the top orifice is obviously small or not at all, it indicates that the internal design of the shower is very general. Even if there are many water outlet methods such as lasing and spraying, the user may not get the corresponding comfortable experience.
3. Secondly, look at the nozzle and pay attention to whether the shower is easy to clean. The blockage of the water outlet of the shower is often caused by the accumulation of impurities in the screen cover. It is inevitable that there will be scale deposition after the shower is used for a long time. If it cannot be cleaned, some spray holes may be blocked. In order to avoid the blockage of the water outlet due to poor water quality, the well-designed shower head is often prominent outside for easy cleaning, or the shower head is made of silica gel, When cleaning, the scale deposited on the nozzle can be brushed off with a rag or hand. Some sprinklers are also equipped with the function of automatically removing scale. You can ask more about it when purchasing sprinklers.
4. Look at the coating and valve core. Generally speaking, the brighter and more delicate the surface of the shower, the better the process treatment of the coating. A good valve core is made of high hardness ceramics, which is smooth and wear-resistant to prevent running, emitting, dripping and leaking. Consumers must try to twist the switch. If the feel is poor, this kind of shower had better not be purchased.
5. Finally, shower accessories will directly affect the comfort of their use, which also needs special attention. For example, whether the water pipe and lifting rod are flexible, how about the bending resistance of sprinkler hose and steel wire, whether the sprinkler connection is equipped with anti twist ball bearing, whether the lifting rod is equipped with rotary controller, etc.