Sihai network

What should I do after the wooden floor is soaked in water? The solution of wooden floor soaking in

Solid wood floor is the most delicate among many floors, because it is processed from natural wood, which preserves the natural properties of wood: it is easy to deform after absorbing water. What should I do if I accidentally soak the floor in water?

What should I do after the wooden floor is blistered

1、 Soak the solid wood floor in water: 'well' stacked and dried in the shade

Solid wood floor is the most delicate among many floors, because it is processed from natural wood, which preserves the natural properties of wood: it is easy to deform after absorbing water.

Common problem: it is easy to get moldy in water. Solid wood flooring is processed from pure solid wood, so it has the natural attribute of wood and is easy to deform and mildew in case of water.

terms of settlement:

1. Hair dryer treatment. After soaking the solid wood floor, wipe the water on the surface as soon as possible. At the same time, take the vacuum cleaner to aim at the splicing gap of the soaking floor to absorb the water vapor. Or take a hair dryer and blow it against the splicing joint with cold air until it is dry, but do not blow it with hot air to prevent the surface from cracking and deformation due to heat drying.

2. Well stacked and dried in the shade. If the soaking area is large and the soaking situation is serious. After the surface ponding is treated, the floor can be carefully pried up, wiped dry one by one with absorbent cloth, stacked and placed in accordance with the 'well' shape, and the space below shall be padded to allow the floor to fully contact the space to dry.

2、 Laminate floor soaking in water: natural evaporation is the most convenient

Laminate floor is the most commonly used floor material at home. Because laminate floor has the characteristics of easy care, wear-resistant surface, not easy to deform after laying, good impact resistance and flame retardancy, it is deeply loved by consumers.

Common problems: accidentally spilling water on the floor, the most common soaking problem is that a small glass of water is poured onto the floor. Many people don't deal with it immediately. Over time, it is found that the floor is warped and moldy. At this time, it is too late.

terms of settlement:

1. Remove the furniture. After soaking in water, the floor should immediately remove the accumulated furniture and articles, try not to step on them, quickly drain the surface water of the floor, remove the skirting line at the edge of the floor as soon as possible, expose the expansion joint of the floor, and dissipate the water vapor by the expansion joint. Never pry up the floor to dry.

2. The floor is naturally air dried. According to the degree of water inflow, complete drying usually takes about seven to fifteen days. The floor with good quality or short immersion time can be recovered by itself. If it is found that warping or flatness cannot be recovered after fifteen days, it should be considered to replace it again.

3. Soak in water in a large area and contact after-sales service. If there is a large area of water soaking, you should timely contact the after-sales service department of the floor for treatment. You can ask the merchant to come to the door for post-treatment, and do not handle it yourself.

3、 Composite floor soaking in water: two pronged approach is good

Composite wood floor is also one of the commonly used floor materials in modern home. Composite floor has the stability of laminate floor and can retain the natural feeling of solid wood floor on the floor surface. Although the composite floor is more durable, it will leave problems after soaking in water.

Frequently asked questions: the floor rises in the water. Although the material of composite wood floor is more durable, in the face of water immersion, the floor will still have such small problems, such as warping, mildew and so on.

terms of settlement:

1. Small area vacuum cleaner absorbs water. If there is a small area of water and the amount of water is not large, treat the dry surface water as soon as possible, and use a vacuum cleaner or blower for cold air to suck the water immersed in the gap between the floors.

2. Large area use well stack. If a large area is immersed in water, the skirting lines around shall be removed as soon as possible, and the immersed floor shall be pried up. Similarly, the space shall be padded with bricks or other things, and the floor shall be stacked in the shape of "well" and dried in the shade.

In daily life, many people lack understanding of floor maintenance knowledge. They panic when they encounter some situations where the floor is soaked in water. They don't know how to start. Finally, the floor needs to be re paved, resulting in waste. Therefore, the emergency treatment when the floor is soaked in water is very important.