Nowadays, water dispensers may be used in both homes and offices. After all, water is a necessity for people's survival. However, although the water dispenser uses pure water and mineral water, which contains almost no impurities, the water dispenser should be thoroughly cleaned at least once every two months. In summer, the temperature is high and bacteria are easy to breed. It should be cleaned every month. But many people don't know how to clean the water dispenser. In fact, the cleaning method of the water dispenser is very simple, and there are more than one. Here are three methods to clean the water dispenser.
1. Wash with homemade lemonade
2. Wash with white vinegar
3. Wash with baking soda
Detailed steps:
1. Power off. Unplug the socket before cleaning, and do not operate with electricity.
2. Drain the water in the water dispenser, turn on the hot and cold water switch, and turn on the sewage outlet behind it (usually the knob made of white plastic). After all the water is drained, turn off all the drainage outlets.
3. Remove the 'smart seat' (that is, the part contacting the mineral water bucket in the water dispenser), and carefully scrub the inner and outer sides of the water dispenser liner and cover with alcohol cotton to prepare for the next disinfection.
4. Then pour in white vinegar or lemonade or baking soda, and try to fill the tank in the water dispenser with the solution. Be sure to fill it, otherwise it will easily burn the tank when heated.
How do you see if it's full of guts? When the solution of the base does not seep, open the cold and hot water outlet, and the solution flows out at both outlets, which means that the inner tank is full.
5. Put the smart seat of the water dispenser back on, then turn on the power and let the water dispenser heat up for 40 minutes.
Then disconnect the power supply, turn on the hot and cold switch and the drain on the back, and discharge the solution.
After the cleaning solution is discharged, pour in clean water for two or three times until there is no smell, so the inside of the water dispenser will be cleaned up!
healthy water
1. To improve the use frequency of drinking fountains, frequent use of drinking fountains is equivalent to frequent flushing with running water, which can reduce scale deposition and bacterial reproduction.
2. After the bottled drinking water is opened and sealed, it is best to drink it within one week, and raw water should not be drunk after 3 days. It should be boiled before drinking.
3. Sometimes there is no water in the bucket on the water dispenser, but there is still ponding at the bucket contact groove. The contact between these water and air will accelerate the propagation of bacteria, so drain the water first and then change the water each time.
4. Do not place the barreled water in the sunlight, and do not buy drinking water that has been stored for too long.