What are the common faults of washing machine? How to repair the common faults of washing machine

washing machine is a household appliance that we use very frequently, and it is also prone to failure. Let's learn about the troubleshooting of four common faults of washing machine, such as motor does not rotate, motor idling or buzzing wave wheel does not rotate, water leakage along the wave axle and slow drainage!

【1】 Motor does not rotate

If the motor of the washing machine does not rotate, check the plug, fuse, connecting wire and other parts in turn from the power supply, and eliminate the fault by inserting the plug, connecting the fuse and connecting the broken connecting wire.

【2】 The motor is idling or buzzing, and the wave wheel does not rotate

When the motor idles or buzzes, the wave wheel does not rotate, the triangular belt may fall off or break, and the wave wheel is stuck by foreign matters. Turn off the power supply, hang or replace the V-belt, and take out foreign matters.

【3】 Water leakage along the wave axle

The water leakage along the wave shaft of the washing machine is caused by sundries such as thread scraps, sand, hairpins and buttons brought into the oil seal, which destroys the oil seal performance. Remove the wave wheel, take out the foreign matter, and then install it carefully.

【4】 Slow drainage

The slow drainage of the washing machine is due to the blockage of foreign matters in the drainage pipe or drain valve. If the foreign matters are removed, it will be removed immediately.