Sihai network

What if the Bluetooth headset is flooded

We usually use Bluetooth headsets when driving, because the Bluetooth headsets are very small. What should we do if we don't pay attention to the water? It should be noted that it is difficult to deform the eardrum due to long-time water inflow and then hot air blowing the headset, and this method may not be applicable to all headphones. After all, the quality of headphones is good and bad.

What if the Bluetooth headset is flooded

Bluetooth is a low-cost and high-capacity short-range wireless communication specification. Bluetooth laptop is a laptop with Bluetooth wireless communication function. Bluetooth technology is not only used in computers, but also can be used in many electronic devices, such as mobile phones, digital cameras, cameras, printers, fax machines, home appliances and so on. So, what if the Bluetooth headset is flooded?

If you don't get water into the Bluetooth headset, give us a good and convenient way. It is to dry the Bluetooth headset directly with a hair dryer. Remember to dry it completely. If it is not dry, charging the Bluetooth headset is likely to lead to a short circuit in the internal circuit of the Bluetooth headset. The Bluetooth headset after the circuit is burned is basically scrapped. Therefore, if your Bluetooth headset is flooded, you must handle it carefully and remember to charge it after it is completely dry.

Is the headset still working

Many times, we will accidentally put the earphone with the clothes into the washing machine or fall into the water, resulting in water in the earphone. So, can the headset continue to be used after it is flooded?

Generally speaking, after the earphone is flooded, the first thing is to dry it, whether it is dried in the sun or by hair dryer. After the headset becomes dry, you can connect your mobile phone or computer to try whether it can still be used. If it does not affect the sound quality, it can of course continue to be used. However, if the sound quality is damaged or the headset can no longer hear sound, it is recommended not to use it again.

As for the change of earphone after water inflow, we can first understand its sound principle, that is, tympanic membrane vibration. Secondly, the reason why the sound becomes smaller or the sound quality is damaged after the earphone is flooded is that the water droplets stick to the tympanic membrane, which deforms the tympanic membrane and affects the vibration frequency and other parameters of the tympanic membrane.

So is there a reliable solution after the headset is flooded? You can try the following methods: first, you can try to remove the water in the headset. The main methods are air drying, cold air drying, blowing hard against the three holes behind the headset, etc. The second is to restore the shape of the tympanic membrane, which is the focus. The specific method is to clean the position of the metal film on the front of the headset when there is little water in the headset, then hold the front of the headset with your mouth, exhale into the headset first, do not leak, you will hear the sound of piapiapia, and then inhale into the headset, do not leak, you will hear the sound of piapia again. After several rounds, the shape of the eardrum of the headset will recover, But don't blow and wash too hard. Finally, complete an inhalation or blowing, and let the tympanic membrane unfold in one direction.

However, it should be noted that it is difficult to deform the eardrum due to long-time water inflow and then hot air blowing the headset, and this method may not be applicable to all headphones. After all, the quality of headphones is good and bad.