&# 8203;&# 8203;&# 8203;&# 8203;&# 8203;&# 8203; How to do if the floor tile is blackened by iron
The floor tiles are scratched by iron objects in the house, such as nails, ladders, etc. It looks really beautiful. Is there any good way to repair it? I'll let you know.
How does floor tile delimit black by iron do
Floor tile is scratched black by ironware, it is to destroy brick face quality of a material commonly, form scratch of damaged brick face. There are two steps to deal with, the first is to remove the black mark.
Toilet cleaner
Toilet cleaner is usually used to clean toilets, of course, it can also be used to clean ceramic tiles. Spray it on the tile with black marks, and then scrub it clean with a brush.
Vinegar wipe
The black marks on the scraped tiles can be poured with vinegar at home and cleaned the next day. Vinegar can react with many dirty things without damaging the floor tiles. The effect is very good. If there are still a few traces after soaking, you can use a soft toothbrush to dip in some toothpaste and clean it.
Alcohol wipe
Alcohol has a very good decontamination ability, a little alcohol spray on ceramic tile traces, repeated wipe also has a good effect Oh!
After this kind of black scratch is removed, it must be repaired in time to avoid repeated blackening in the future. The specific methods are as follows:
Floor tile repairing agent
With professional floor tile repair agent to repair tile scratches, that of course is the most appropriate.
Use a brush to dip in the repairing agent to trace the cracks of the scratches. After 30 minutes, apply it again. After drying, repeat it again until there is a reflection on the scratches from the side. After this treatment, the scratches of the floor tiles can be kept clean for a long time;
In addition, the deep scratches on the brick surface can also be polished by water mill first, but it should be polished carefully, otherwise there will be pits or greater damage to the brick surface, such as dull and wider scratches.
Soak and scrub with detergent
You can soak in the cleaner for 3 minutes before scrubbing. The floor tile cleaner reacts with the metal scratch and becomes loose after decomposition. Use a wet towel dipped in the cleaner to wipe it with a little force. The clean as new brick surface will show immediately, without any impact on the surface of the floor tile and no change in luster.
Sanding and waxing
Prepare a piece of sandpaper. If you want to buy the most delicate and water-resistant one, it is suggested that you can buy a piece of sandpaper with 5000 mesh or more, no more than 5 yuan. Soak it in water for about 15 minutes, then take it out and slowly polish the scratch on the ceramic tile until the mark becomes shallow and no more. Then, use a wet soft cloth to wipe the polished area clean. Floor tiles can be polished on the floor wax, dry after wiping with cloth, you can have a glossiness, become very new.