many people say that bows are difficult to tie, and they think bows are particularly good-looking. Let's take a look at the simple bowknot tying method with Xiaobian
The first step is to cross the two belts.
The second step, the upper belt around the lower belt, and then hang down from the middle of the two belts, after taut, tie a knot.
The third step is to fold the lower belt into one side of the bow and place it on the right side along the direction of the belt.
Step 4: after the upper band bypasses the bow on the right side, fold it into the bow on the other side.
The fifth step, will be formed after the bow slowly finishing.
The sixth step, tighten, a beautiful bow on the great success. Diagram 2 of bow tie method:
1. Put both ends of the tape in order and place it horizontally. It doesn't need any skill
2. Cross the two belts. This direction will be easier
3. The key point is coming. Fold the belt on the left back. The length is arbitrary. It depends on the size of the bow you want. Finally, it can be adjusted. The one on the right is still
4. Pick up the one on the right and go through it right above the middle of the knot.
5. It's still the tape on the right. Pull it down in the direction you just circled, as shown in the figure below
6. Fold the tape on the right to the left, just like the one on the left
7. The most important step to get to dachengla is to tuck the newly folded part out of the bow ring
8. Look, it's going through. It's almost finished.
9. Pull both sides of the belt tight, adjust the length, and a beautiful bow is finished.